Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   - 4.5. Diesel engines of 1,7 l
      4.5.1. A technical characteristics
      4.5.2. A method of removal of the engine
      4.5.3. Engine repair
      4.5.4. Replacement of engine oil and the oil filter
      + 4.5.5. Check, removal, installation and adjustment of a gear belt
      4.5.6. Check and adjustment timing
      4.5.7. Removal and installation of a head of the block of cylinders
      4.5.8. Removal and camshaft installation
      4.5.9. Removal and installation of the oil pallet
      4.5.10. Removal and installation of the oil pump
      4.5.11. Removal and installation перепускного the valve
      4.5.12. Removal and installation of the water pump
      4.5.13. Removal, check and thermostat installation
      4.5.14. Removal and installation of pistons and rods
      4.5.15. Removal and flywheel installation
      4.5.16. Replacement of sealing rings
      4.5.17. Replacement of support of the power unit
      4.5.18. Engine removal
      4.5.19. Engine repair
      4.5.20. Removal, repair and assemblage of the oil pump
      + 4.5.21. A head of the block of cylinders
      4.5.22. Check of elements of the engine
      4.5.23. Engine installation
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

4.5.18. Engine removal
1. Lift and fix a forward part of the car.
2. Remove a cowl.
3. Remove the accumulator.
4. Merge cooling liquid.
5. Remove the top both bottom hoses of a radiator and hoses of a heater and a broad tank.
6. Remove the air filter and воздухозаборный a branch pipe.
7. Disconnect all wires from the engine and its elements:
      – The switch of a control lamp of pressure of oil;
      – The generator;
      – The gauge of temperature of a cooling liquid;
      – The fuel pump;
      – The electric tyre of candles накаливания;
      – The radiator and thermoswitch fan.
8. Remove a radiator and the radiator fan.
9. Disconnect tubes of giving and return of fuel from the fuel pump.
10. Disconnect a cable of an accelerator from the fuel pump.
11. Remove a generator belt.
12. Remove the pump of system of the amplifier of a steering and fix the pump aside, without disconnecting from it hoses.
13. Disconnect a vacuum tube of the vacuum amplifier of brakes from the vacuum pump.
14. Remove a pulley of a cranked shaft.
15. Remove the generator and теплоизолирующий a guard.
16. Remove the bottom cover of coupling or the hydrotransformer.
17. On models with an automatic transmission unscrew the bolts connecting the hydrotransformer with a plate of a drive.
18. Establish the piston of the first cylinder in ВМТ.
19. Remove a reception exhaust pipe.
20. Remove the oil filter.
21. Fix the engine on the lift.
22. Establish a jack under a transmission and unscrew all bolts connecting the engine with a transmission.
23. Remove the right support of the engine.
24. Disconnect the engine from a transmission.

25. Lift the engine and take it from the car.

On the main page