Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
+ 4.1. Engine OHV (with a camshaft in the block of cylinders)
+ 4.2. Engines OHC
+ 4.3. Engine DOHC with 16 valves
+ 4.4. Diesel engines 16D and 16DА
- 4.5. Diesel engines of 1,7 l
4.5.1. A technical characteristics
4.5.2. A method of removal of the engine
4.5.3. Engine repair
4.5.4. Replacement of engine oil and the oil filter
+ 4.5.5. Check, removal, installation and adjustment of a gear belt
4.5.6. Check and adjustment timing
4.5.7. Removal and installation of a head of the block of cylinders
4.5.8. Removal and camshaft installation
4.5.9. Removal and installation of the oil pallet
4.5.10. Removal and installation of the oil pump
4.5.11. Removal and installation перепускного the valve
4.5.12. Removal and installation of the water pump
4.5.13. Removal, check and thermostat installation
4.5.14. Removal and installation of pistons and rods
4.5.15. Removal and flywheel installation
4.5.16. Replacement of sealing rings
4.5.17. Replacement of support of the power unit
4.5.18. Engine removal
4.5.19. Engine repair
4.5.20. Removal, repair and assemblage of the oil pump
- 4.5.21. A head of the block of cylinders
4.5.21.1. Repair of a head of the block of cylinders
4.5.21.2. Check of a head of the block of cylinders
4.5.21.3. Clearing of a head of the block of cylinders and pistons of a deposit
4.5.22. Check of elements of the engine
4.5.23. Engine installation
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Arrangement маслоразбрызгивающих jets of system of cooling of pistons
Installation of new jets with the help выколотки in diameter 6 mm
Look the corresponding description in subsection 4.4.22.1 taking into account the additional information.
In engines 17D and 17DR only final valves are equipped by rotary mechanisms.
To beat out vortical chambers, it is necessary to use выколотку in diameter 6 mm. |
On the main page
|