Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   - 4.5. Diesel engines of 1,7 l
      4.5.1. A technical characteristics
      4.5.2. A method of removal of the engine
      4.5.3. Engine repair
      4.5.4. Replacement of engine oil and the oil filter
      + 4.5.5. Check, removal, installation and adjustment of a gear belt
      4.5.6. Check and adjustment timing
      4.5.7. Removal and installation of a head of the block of cylinders
      4.5.8. Removal and camshaft installation
      4.5.9. Removal and installation of the oil pallet
      4.5.10. Removal and installation of the oil pump
      4.5.11. Removal and installation перепускного the valve
      4.5.12. Removal and installation of the water pump
      4.5.13. Removal, check and thermostat installation
      4.5.14. Removal and installation of pistons and rods
      4.5.15. Removal and flywheel installation
      4.5.16. Replacement of sealing rings
      4.5.17. Replacement of support of the power unit
      4.5.18. Engine removal
      4.5.19. Engine repair
      4.5.20. Removal, repair and assemblage of the oil pump
      + 4.5.21. A head of the block of cylinders
      4.5.22. Check of elements of the engine
      4.5.23. Engine installation
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





4.5.17. Replacement of support of the power unit
THE GENERAL DATA

Engine fastenings

1 – a right forward support,
2 – an arm of a right forward support,
3 – a back support,
4 – an arm of a back support,
5 – a left forward support,
6 – an arm of a left forward support,
7 – an arm of the right forward support (engines with the steering amplifier)

If shock-absorbers of support of the engine are worn out or damaged, it is necessary to replace them.

Lift and fix a forward part of the car. Fix the engine on the lift or on a jack established under the engine.

PERFORMANCE ORDER
The right forward support
1. Unscrew three bolts, крепящих a support arm to the block of cylinders, and two bolts, крепящих a support to a body (are specified by arrows). Remove fastening entirely and disconnect a support from an arm.
2. Installation is made in sequence, return to removal.
The left forward support
3. Unscrew two bolts (are specified by arrows), крепящих a support to a transmission arm, and two bolts (are specified by arrows), крепящих a support to a body. Remove a support.
4. Installation is made in sequence, return to removal.
Back support
5. Unscrew two bolts, крепящих a support to a transmission arm (), and unscrew two nuts, крепящих a support to a cross-beam (). Remove a support.
6. Installation is made in sequence, return to removal.

On the main page