Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   + 6.1. Models with the carburettor
   - 6.2. Models with system of injection of fuel
      6.2.1. A technical characteristics
      6.2.2. Removal and installation of the case of the air filter
      6.2.3. Removal, installation and adjustment of a cable of an accelerator
      6.2.4. Used fuel
      + 6.2.5. System of injection of fuel
      6.2.6. Pressure removal in fuel system
      6.2.7. Removal and installation of the fuel pump
      6.2.8. Removal and installation of the gauge of level of fuel
      6.2.9. Removal and installation of a fuel tank
      6.2.10. Check and adjustment of system of injection of fuel
      6.2.11. Removal and installation of elements of one-dot system of injection of fuel
      + 6.2.12. Removal and installation of elements of multidot system of injection of fuel
      6.2.13. Removal and installation of an inlet collector
      6.2.14. Removal and installation of a final collector
      6.2.15. Removal and exhaust system installation
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





6.2.2. Removal and installation of the case of the air filter

Removal

PERFORMANCE ORDER
Models 1,4 and 1,6 l
1. The case of the air filter acts in film in the same way, as well as on models with the carburettor. Look the corresponding description in subsection 6.1.3.
Models 1,8 and 2,0 l with 8th valves
2. Remove filtering element of the air filter.
3. Disconnect an air inlet pipe, then unscrew screws and remove the case of the air filter from a motor compartment.

Models 2,0 of l with 16th valves

4. Remove an air branch pipe which connects the air filter to a measuring instrument of a stream of air.
5. Unscrew three bolts (two bolts are specified by arrows in drawing at the left, the third bolt – in drawing on the right), fastening the case of the air filter.
6. Remove the case of the air filter.

Installation

Installation is made in sequence, return to removal.

On the main page