Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Specifications
   11.2. The battery
   + 11.3. Ignition system
   11.4. The coil () ignitions
   11.5. The ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. The block of electronic ignition
   11.8. The induction gauge
   + 11.9. System of a charge of the battery
   + 11.10. The generator
   11.11. System of start-up of the engine
   + 11.12. The starter electric motor
   11.13. The traction relay
   11.14. Pressure check
   11.15. Short circuit detection
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. A finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crosspieces
   11.22. Breakers
   11.23. The relay
   11.24. The breaker of indexes of turn / of the alarm system
   11.25. The switch of indexes of turn
   11.26. The lock of ignition and a lock drum
   11.27. The switch of external illumination
   11.28. The screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. The headlight case
   11.32. Replacement of lamps
   11.33. The receiver and dynamics
   11.34. The aerial
   + 11.35. The screen wiper electric motor
   11.36. The switch of heating of back glass
   11.37. A heater of back glass
   11.38. A guard of devices
   11.39. A sound signal
   11.40. The electric drive of mirrors
   11.41. Cruise-control
   + 11.42. The electric drive window lifterа
   11.43. The electric drive of door-locks
   11.44. Safety pillows
+ 12. Electroschemes

11.26. The lock of ignition and a lock drum Check

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect a safety pillow (subsection 11.44 see).
3. Remove a wheel.
4. Remove a casing of a steering column.
5. Hook and get an overlay of the lock of ignition.
6. Disconnect from the lock sockets.
7. Check up chain presence between lock conclusions.
8. In lock LOCK position between chain conclusions should not be.
9. In position of lock ASS the chain should be between conclusions 2 and 3.
10. In position of lock ON the chain should be between conclusions 2, 3 both 4 and conclusions 6 and 7.
11. In position of lock START the chain should be between conclusions 1, 2 both 4 and conclusions 6, 7 and 8.
12. Check up absence of short circuit of contacts of the switch of the alarm system of the key left in the lock. For what translate the switch in position Off and get a key.
13. Insert a key and translate the switch in position On, between contacts 1 and 2 should be a chain.
14. If results of check negative the switch replace.

Replacement
PERFORMANCE ORDER
1. Execute stages 1–6.
2. Insert a key into the lock and translate in position АСС.
3. Having inserted a thin screw-driver into the bottom aperture of the cast case of the lock, wring out a latch, simultaneously submitting the lock on itself.
4. Installation is carried out upside-down.


On the main page