Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Specifications
   11.2. The battery
   + 11.3. Ignition system
   11.4. The coil () ignitions
   11.5. The ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. The block of electronic ignition
   11.8. The induction gauge
   + 11.9. System of a charge of the battery
   + 11.10. The generator
   11.11. System of start-up of the engine
   + 11.12. The starter electric motor
   11.13. The traction relay
   11.14. Pressure check
   11.15. Short circuit detection
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. A finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crosspieces
   11.22. Breakers
   11.23. The relay
   11.24. The breaker of indexes of turn / of the alarm system
   11.25. The switch of indexes of turn
   11.26. The lock of ignition and a lock drum
   11.27. The switch of external illumination
   11.28. The screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. The headlight case
   11.32. Replacement of lamps
   11.33. The receiver and dynamics
   11.34. The aerial
   + 11.35. The screen wiper electric motor
   11.36. The switch of heating of back glass
   11.37. A heater of back glass
   11.38. A guard of devices
   11.39. A sound signal
   11.40. The electric drive of mirrors
   11.41. Cruise-control
   + 11.42. The electric drive window lifterа
   11.43. The electric drive of door-locks
   11.44. Safety pillows
+ 12. Electroschemes





11.43. The electric drive of door-locks
THE GENERAL DATA

The electric drive structure includes switches a lock drive, the management and wire block.

The management block is mounted in salon, to the right of the block of safety locks. It is independently possible to execute simple checks of a drive and connections. More detailed check and elimination of serious malfunctions is carried out in car-care centre.

Management of locks is carried out by the reversive solenoids mounted in door niches.

Switches of locks have 2 positions Lock and Unlock. From the switch on the management block the signal of unlocking or door lock-out arrives. The management block changes polarity of a signal according to switch position, as a result conclusions of the coil of the solenoid incorporate or weight or to a food +12 Century

On a part of cars antijoy ride devices are built in door-locks.

Check

PERFORMANCE ORDER
1. Safety locks and breakers are at first checked.
2. At operation of a drive of the lock at any position of the switch click should be listened.
The switch of the lock of a door of the driver
3. In position LOCK of the switch the chain should be between conclusions 2 and 4.
4. In position OFF of the switch of a chain between conclusions should not be.
5. In position UNLOCK of the switch the chain should be between conclusions 2 and 3.
The switch of the lock of a door of the passenger
6. In position LOCK of the switch the chain should be between conclusions 3 and 4.
7. In position OFF of the switch of a chain between conclusions should not be.
8. In position UNLOCK of the switch the chain should be between conclusions 2 and 4.
The switch of the lock of a door of a back compartment
9. In position LOCK of the switch the chain should be between conclusions 1 and 6, and also between conclusions 3 and 4.
10. In position UNLOCK of the switch the chain should be between conclusions 1 and 3, and also between conclusions 4 and 6.
11. Between conclusions 2 and 5 should be a chain (an illumination chain).
12. If switches are serviceable, check up breakage presence in the wires connecting the block of management, solenoids and switches. Otherwise the switch replace.
13. Check up connection with weight of the block of management and switches.
14. If does not work only one solenoid check up presence on it pressure, having removed door facing. In position Lock on one of wires there should be a pressure. After switch reconducting in position Unlock pressure should be on an opposite wire.
15. If pressure is, the solenoid replace.

16. Otherwise check up the relay or a wire between the block of management and the solenoid. As a rule this wire breaks at closing and door opening.

On the main page