Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Specifications
   11.2. The battery
   + 11.3. Ignition system
   11.4. The coil () ignitions
   11.5. The ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. The block of electronic ignition
   11.8. The induction gauge
   + 11.9. System of a charge of the battery
   + 11.10. The generator
   11.11. System of start-up of the engine
   + 11.12. The starter electric motor
   11.13. The traction relay
   11.14. Pressure check
   11.15. Short circuit detection
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. A finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crosspieces
   11.22. Breakers
   11.23. The relay
   11.24. The breaker of indexes of turn / of the alarm system
   11.25. The switch of indexes of turn
   11.26. The lock of ignition and a lock drum
   11.27. The switch of external illumination
   11.28. The screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. The headlight case
   11.32. Replacement of lamps
   11.33. The receiver and dynamics
   11.34. The aerial
   + 11.35. The screen wiper electric motor
   11.36. The switch of heating of back glass
   11.37. A heater of back glass
   11.38. A guard of devices
   11.39. A sound signal
   11.40. The electric drive of mirrors
   11.41. Cruise-control
   + 11.42. The electric drive window lifterа
   11.43. The electric drive of door-locks
   11.44. Safety pillows
+ 12. Electroschemes

11.40. The electric drive of mirrors
THE GENERAL DATA

Numbering of conclusions of the switch of the electric drive of mirrors

1. A left-hand side

2. The right party

3. Upwards

4. Downwards


Numbering of conclusions of the switch of the electric motor of mirrors

 

PERFORMANCE ORDER
1. The mirror drive is carried out from 2 electric motors of vertical and horizontal displacement.
2. Include ignition (the engine not to start) and lower lateral glasses. The selector which has been built in in the switch, include the necessary mirror and check up work of a drive of the right and left mirrors, displacing them to the right and to the left, upwards and downwards. Hear to work of electric motors.
3. If work of electric motors is listened, and the mirror does not move, the mechanism of a drive in a mirror is faulty. Remove a mirror and disassemble.
4. If work of electric motors is not listened also mirrors not движутся check up a safety lock.
5. If the safety lock is serviceable, get the switch, without disconnecting wires. Include ignition and check up pressure on the switch. If pressure is not present, check up wires from a safety lock to the switch. Otherwise check up the switch for what execute following actions (see fig. Numbering of conclusions of the switch of the electric drive of mirrors).
The left mirror
6. In position UP of the switch the chain should be between conclusions 6 and 10, and also between conclusions 1 and 9.
7. In position DOWN of the switch the chain should be between conclusions 1 and 10, and also between conclusions 6 and 9.
8. In position LEFT of the switch the chain should be between conclusions 5 and 9, and also between conclusions 6 and 10.
9. In position RIGHT of the switch the chain should be between conclusions 5 and 10, and also between conclusions 6 and 9.
The right mirror
10. In position UP of the switch the chain should be between conclusions 6 and 10, and also between conclusions 1 and 9.
11. In position DOWN of the switch the chain should be between conclusions 1 and 10, and also between conclusions 6 and 9.
12. In position LEFT of the switch the chain should be between conclusions 5 and 9, and also between conclusions 6 and 10.
13. In position RIGHT of the switch the chain should be between conclusions 5 and 10, and also between conclusions 6 and 9.
14. If results of checks negative the switch replace.
15. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crosspiece this wire on weight. If the mirror works normally with a crosspiece repair "regular" connection with weight.
16. If the mirror does not work, disassemble a mirror and check up pressure presence on wires. Include ignition and translate the switch in all positions, checking pressure. On one of wires from the switch there should be a pressure in its each position (except for position Off).
17. If pressure is absent, check up a chain from a mirror to the switch.
18. If pressure is, check up the electric motor, having arrived as follows (fig. Numbering of conclusions of the switch of the electric motor of mirrors see).     
19. Check up mirror moving to the left for what connect a crosspiece (+) - a conclusion of the battery to a conclusion 3, and (-) - a conclusion – with a conclusion 1.
20. Change polarity and be convinced that the mirror moves to the right
21. Check up mirror moving upwards for what connect a crosspiece (+) - a conclusion of the battery to a conclusion 2, and (-) - a conclusion – with a conclusion 1.
22. Change polarity and be convinced that the mirror moves downwards.
23. If results of checks negative a mirror in gathering replace.


On the main page