Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
- 11. An electric equipment
   11.1. Specifications
   11.2. The battery
   + 11.3. Ignition system
   11.4. The coil () ignitions
   11.5. The ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. The block of electronic ignition
   11.8. The induction gauge
   + 11.9. System of a charge of the battery
   + 11.10. The generator
   11.11. System of start-up of the engine
   + 11.12. The starter electric motor
   11.13. The traction relay
   11.14. Pressure check
   11.15. Short circuit detection
   11.16. Check of reliability of grounding
   11.17. Check of integrity of a chain
   11.18. A finding of not closed chain
   11.19. Search of malfunctions
   11.20. Safety locks
   11.21. Fusible crosspieces
   11.22. Breakers
   11.23. The relay
   11.24. The breaker of indexes of turn / of the alarm system
   11.25. The switch of indexes of turn
   11.26. The lock of ignition and a lock drum
   11.27. The switch of external illumination
   11.28. The screen wiper switch
   11.29. Lamps of headlights
   11.30. Adjustment of headlights
   11.31. The headlight case
   11.32. Replacement of lamps
   11.33. The receiver and dynamics
   11.34. The aerial
   + 11.35. The screen wiper electric motor
   11.36. The switch of heating of back glass
   11.37. A heater of back glass
   11.38. A guard of devices
   11.39. A sound signal
   11.40. The electric drive of mirrors
   11.41. Cruise-control
   + 11.42. The electric drive window lifterа
   11.43. The electric drive of door-locks
   11.44. Safety pillows
+ 12. Electroschemes

11.27. The switch of external illumination
THE GENERAL DATA

Numbering of conclusions of the switch of external illumination and switch position

Check

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect a safety pillow (subsection 11.44 see).
3. Remove a wheel.
4. Remove a casing of a steering column.
5. Disconnect from the switch of indexes of turn / of light of headlights a socket.
6. Check up chain presence between switch conclusions.
7. In switch OFF position between chain conclusions should not be.
8. In lock LOCK position between chain conclusions should not be.
9. In switch TAIL position (back lanterns) the chain should be between conclusions 14 and 16.
10. In position of switch HEAD (headlight) the chain should be between conclusions 13, 14 and 16.
11. At inclusion of a passing light of headlights (position Low beam) the chain should be between conclusions 16 and 17.
12. At inclusion of a headlight of headlights (position High beam) the chain should be between conclusions 7 and 16.
13. In switch FLASH position (a mode of a blinking headlights) the chain should be between conclusions 7, 8 and 16.

Replacement
PERFORMANCE ORDER
1. Get the switch from the case.
2. Installation is carried out upside-down. Before wheel installation check up a centering of the coil of a wire of a pillow of safety (subsection 9.14 see).


On the main page