1. Remove a forward wheel.
ATTENTION
Operation of lifting and car installation on supports is connected with danger! Therefore before operation carrying out familiarise with subsection of Poddomkrachivanie of the car.
|
| 2. Mark a paint position of a forward wheel concerning a nave. It will allow to establish at assemblage отбалансированное a wheel in its former position. Loosen the bolts of fastening of a wheel at the car standing on the earth. Lift a forward part of the car, put it on supports and remove a forward wheel. |
| 3. Turn out screws Torx. |
|
|
| 4. Compress локер a little and take out from a wheel arch. |
| 5. Fix локер (arrow) screws Torx. |
| 6. Establish into place a forward wheel so that the marks put at removal have coincided. Preliminary grease with a thin layer подшипниковой greasings aligning belt of a disk of a wheel on a nave. Bolts of fastening of a wheel do not grease. Rusty bolts replace. Wrap bolts. Lower the car on wheels and tighten bolts cross-wise the moment 120 Н•м. |