| 1. Slightly fix замковый an element–1 nuts–2. |
| 2. Slightly fix a bolt–2 adjusting emphasis–1 below at lock facing. |
| 3. Turn on tightening the screw–2 and extend an adjusting emphasis–3 a little. 1 – a rivet. |
| 4. Close a door of a back–4 and expose its moving to a longitudinal and cross-section direction so that to provide a uniform backlash in relation to adjoining elements of a body. The lock of a door of a back should be fixed in замковом an element in the second position. The backlash size is specified in Specifications. |
| 5. At performance of this operation an adjusting emphasis should be displaced in correct position. |
| 6. Open a door of a back and slightly tighten the moment 2 Н•м tightening the screw–2. HUNDRED apply To achievement of the specified moment динамометрическую a screw-driver. |
| 7. Close a back door. |
| 8. Adjust an emphasis–1 from within with the help probeа so that their distance in relation to facing of an element of the lock made 1 mm. |
ATTENTION Adjusting emphasis–1 at the closed door of a back should not adjoin to lock facing.
|
|
9. Tighten a bolt–2 moment 8 Н•м. |
| 10. Check up a backlash, address to Specifications. |