The uniform lock – the general data and vacuum hoses
THE GENERAL DATA
Conducting of the uniform lock
1 – a hose pressure head/vacuum
2 – an adjusting element of a forward back door
3 – an adjusting element of a cover of a tank
4 – the plug
5 – an adjusting element of a door of a back
6 – the pump of the uniform lock
7 – the plug
8 – a socket
The uniform lock has a vacuum drive. After long inactivity of the car and after replacement of the pump it is put in action only as a result of repeated inclusion.
If the system is serviceable, blocking of all locks comes into effect through 2 with the ambassador of inclusion. If the pump works more than 5 with, in system is available негерметичность.
At presence негерметичности the pump should not work more than 50 with then the management block in the pump of the uniform lock switches off the pump.
Repair of a vacuum hose
PERFORMANCE ORDER
1. Cut out a knife the damaged site.
2. Cut off a spare hose, for example, Audi 533 862 225 necessary lengths and put on both ends of a vacuum line.
Undocking штекерного connections of a rack And
PERFORMANCE ORDER
1. A socket–2 at a rack And it is accessible after removal of facing of a rack And. 1 – a casing, 3 – a vacuum hose to the pump of the uniform lock.
ATTENTION
For undocking штекерных connections of vacuum hoses of the uniform lock and adjusting elements it is necessary to unblock them preliminary.
2. Compress a socket–1 and disunite. 2 – an adjusting element of the lock of a door.
3.Расстыкуйте a socket.
Lining of vacuum lines at doors
PERFORMANCE ORDER
1. Enter a socket–1 into a rack And and join.
2. Fix a vacuum hose–2 in a clip–3. 4 – a beam.
3. Fix a vacuum hose–1 in a clip–2.
4. Fix a socket in an adjusting element of a door.