1. Directions of streams snuffled a screen wiper of 0.8 mm can be adjusted by means of a needle. For this purpose it insert into a nozzle and direct on a label on glass. HUNDRED apply for this purpose the special tool, for example, HAZET 4850–1. ATTENTION
If the stream is not regulated or leaves non-uniformly, it is necessary to replace a nozzle.
2. Nozzles can be cleared by means of compressed air. For this purpose remove nozzles and blow a hose. ATTENTION
Do not blow nozzles against an expiration direction.
Windscreen
PERFORMANCE ORDER
1. Plan on a windscreen a felt-tip pen giving a soluble trace, 4 points in places where the stream should concern.
2. The sizes for adjustment are resulted on an accompanying illustration. ATTENTION
The resulted sizes are counted sideways from a water modular lath–1 and from below from an additional cover–2. The sizes represent anticipatory values for the moving car. It means that nozzles on the standing car give slightly displaced stream.
Back glass
PERFORMANCE ORDER
1. Plan on a windscreen a felt-tip pen giving a soluble trace, 4 points in places where the stream should concern.
2. The size for adjustment is resulted on an accompanying illustration. ATTENTION
The size is calculated for a direction going at right angle to the central axis of a drive of a screen wiper–1.
3. Uncover–2 and adjust a nozzle. 3 – a cleaner brush, 4 – a ceramic element.