Audi A3

Since 1997 of release

Repair and car operation



Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
- Systems of cooling, heating
   + System of cooling of the engine
   - Systems of ventilation, heating and air conditioning
      The general information and security measures
      Removal and installation air дефлекторов
      Removal and installation of a nozzle of area of feet
      Removal and installation of a drive of a heater/replacement of a lamp
      Removal and installation of cables of a drive of management of a heater
      Removal and installation of the fan of fresh air
      Removal and installation of the additional resistor
      The conditioner
      Removal and compressor installation
      Conditioner diagnostics on codes on the display of the block of its management
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electroschemes





Removal and installation of a nozzle of area of feet

REMOVAL

PERFORMANCE ORDER
1. Remove a shelf from outside the driver, address to subsection Removal and pocket installation from outside водител.
2. Disconnect a rack () the central console.
3. Take out connecting elements between a nozzle of area of feet and the channel of a heater of a back part of salon ().
4. Turn away fastening bolts ().
5. Take out a nozzle (D) in a direction of the party of the driver (marksman).

INSTALLATION

Installation is carried out in sequence, return to removal.
On the main page