Audi A3

Since 1997 of release

Repair and car operation



Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
- Systems of cooling, heating
   + System of cooling of the engine
   - Systems of ventilation, heating and air conditioning
      The general information and security measures
      Removal and installation air дефлекторов
      Removal and installation of a nozzle of area of feet
      Removal and installation of a drive of a heater/replacement of a lamp
      Removal and installation of cables of a drive of management of a heater
      Removal and installation of the fan of fresh air
      Removal and installation of the additional resistor
      The conditioner
      Removal and compressor installation
      Conditioner diagnostics on codes on the display of the block of its management
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electroschemes





Removal and installation of the fan of fresh air

REMOVAL

PERFORMANCE ORDER
1. Remove a ware box, address to subsection Removal and installation of a ware box.
2. Remove the additional resistor, address to subsection Removal and installation of the additional resistor.
3. Disconnect the tip () from the fan (). Take out the fan downwards from a heater (the marksman on an illustration).
4. If necessary turn away 2 bolts of fastening of the electric motor of the fan to a basis plate.
INSTALLATION
5. Insert the fan into a heater.
6. Fix the tip ().
7. Establish the additional resistor, address to subsection Removal and installation of the additional resistor.
8. Establish a ware box, address to subsection Removal and installation of a ware box.
On the main page