Opel Kadett E

1984-1991 of release

Repair and car operation

13.24.11. Replacement of bulbs

PERFORMANCE ORDER

1. At replacement of bulbs execute following actions. 2. Remove a wire of weight from the accumulator. 3. Before bulb replacement check up a corresponding electric chain and a safety lock. 4. Do not concern a glass flask of a lamp barehanded. The fingerprint evaporates and besieged on a reflector therefore illumination worsens. 5. Remember that if the bulb just burnt, it can be very hot. 6. Check up a condition of contacts in a bulb and a bulb cartridge. Before installation of a new bulb clear from contacts corrosion and dirt traces. 7. Necessarily replace the failed lamps with lamps of the same type. 8. At installation of a lamp of bayonet type check up that cartridge contacts are reliably connected to lamp contacts.

HEADLIGHTS

PERFORMANCE ORDER

1. Open a cowl and disconnect an electric socket from a back part of the block of a headlight. 2. For access to spring скобе, крепящей a lamp, remove a rubber cover. 3. Compress spring скобы fastenings of a lamp and move скобы aside. 4. Take a lamp from a headlight. The prevention Do not concern a glass flask of a lamp barehanded. Stains arising on imprudence from touches wipe pure безворсовой a rag or spirit. 5. Establish a new bulb in sequence, return to removal.

FORWARD DIMENSIONAL LAMP

PERFORMANCE ORDER

1. Open a cowl and disconnect an electric socket from the holder of a lamp. 2. Remove the holder of a lamp for what press it and in this position turn it counter-clockwise. 3. Remove from the holder a lamp and replace it with the new.

THE FORWARD INDEX OF TURNS

PERFORMANCE ORDER

1. Open a cowl and remove the holder of a lamp for what compress support of the holder together and turn them counter-clockwise. 2. Replace a bulb and establish the holder of a bulb into place.

FORWARD ANTIFOG HEADLIGHT

PERFORMANCE ORDER

1. Working under a forward bumper, remove a back cover from an antifog headlight, turning it counter-clockwise. 2. Release and remove a lamp накаливания, then disconnect an electric socket in the first connection, but not on a lamp it is direct. 3. Do not concern with hands of a glass cylinder of a lamp. 4. Establish a new lamp and a cover into place.

BACK LANTERNS

PERFORMANCE ORDER

1. Remove the panel of furnish or facing in a luggage space for access to a back lantern. 2. Disconnect an electric socket from the holder of bulbs (And – an electric socket of a back lantern, In – a clamp of the holder of bulbs) 3. Press a clamp and remove the holder of bulbs from a back lantern. 4. Unscrew three screws (are specified by arrows), or two screws on models the Versatile person. 5. Remove a back lantern. 6. Installation is made in sequence, return to removal.

BACK ANTIFOG LANTERN

PERFORMANCE ORDER

1. Unscrew two screws and remove рассеиватель from a back antifog lantern. 2. Replace a bulb. 3. Installation is made in sequence, return to removal.

LAMP OF ILLUMINATION OF LICENSE PLATE

PERFORMANCE ORDER

1. Using a screw-driver edge as the lever, remove a lantern of illumination of licence plate from a back bumper. 2. Disconnect from a lantern an electric socket. 3. For access to a bulb release two clamps and remove рассеиватель from a lantern. 4. Installation is made in sequence, return to removal.

LAMPS OF ILLUMINATION OF SALON

PERFORMANCE ORDER

1. Turn away the screw of fastening of grounding of a lamp of illumination of a motor compartment. 2. Remove a lamp of illumination of a luggage space. 3. Using a screw-driver edge as the lever and being careful, remove рассеиватель from a lamp of illumination of salon. 4. Take a bulb from spring contacts or a cartridge and establish a new bulb.

LAMPS OF ILLUMINATION OF THE COMBINATION OF DEVICES AND CONTROL LAMPS

PERFORMANCE ORDER

1. Remove a combination of devices. 2. For removal of the lassie накаливания turn a cartridge of a bulb and take it from a combination of devices. 3. Take a bulb from a cartridge, having pulled it on itself. 4. Establish a new bulb in sequence, return to removal.

LAMPS OF ILLUMINATION OF SWITCHES

In the switch of antifog headlights the illumination bulb is built in the switch and cannot separately be replaced.

PERFORMANCE ORDER

1. For replacement of a bulb of illumination of the switch remove the switch. 2. Remove a bulb of illumination of the switch. 3. Establish a new bulb in sequence, return to removal.