Opel Kadett E

1984-1991 of release

Repair and car operation

13.24.22. Removal and installation of a radio receiver from a player of cartridges

THE GENERAL DATA

On cars the radio receiver or a radio receiver with a player of cartridges is serially established.

EARLY MODELS

PERFORMANCE ORDER

1. Insert two special скобы on the right and at the left into apertures of the forward panel of a radio receiver. 2. Slightly wring out скобы outside at the expense of what clamps скоб will nestle inside. 3. In this position take a radio receiver uniform effort. 4. Disconnect from a radio receiver electric sockets and the aerial tip. 5. If necessary unbend uvulas and take a radio receiver pocket. 6. At radio receiver installation connect to it electric sockets and the tip of the aerial and insert a radio receiver into place to защелкивания clamps.

LATE MODELS

Since 1989 for prevention of theft of a radio receiver following measures are provided:

  – Apertures for installation скоб for radio receiver removal are closed by screws;
  – Registration number of a radio receiver is beaten out on a casing;
  – On all models the electronic code of safety is established. After a detachment of the accumulator the radio receiver will not work, while the corresponding code will not be entered into the receiver.

PERFORMANCE ORDER

1. Unscrew screws заглушки from four apertures on radio receiver corners. 2. The further operations on removal and radio receiver installation are similar to operations on removal and radio receiver installation on early models (see above).