Draught of lever transfer of the lock
Removal
| PERFORMANCE ORDER |
| 1) place the plug in draught of lever transfer 2 |
| 2) insert draught 3 into the lever |
| 3) establish an assembly clamp 4 in disconnecting lever of a door-lock |
4) check up a free wheeling of draught of lever transfer in a clamp 4, without rendering pressure upon the disconnecting lever of a door-lock;
As much as possible admissible люфт – 1.0 mm |
|
Installation Installation carry out upside-down.
To spend adjustment move муфту upwards to a working clamp 4.
Draught of lever transfer of the lock (Compartment model)
Removal
| PERFORMANCE ORDER |
| 1) establish the plug in the lever 2 |
| 2) hook on draught of lever transfer 3 on the lever |
| 3) insert a fixing clamp 4 into disconnecting lever of a door-lock |
| 4) check up a free wheeling of a clamp 4, without rendering pressure upon the disconnecting lever of a door-lock; the maximum free wheeling of 1.0 mm |
|
Draught of lever transfer of the lock, installation Installation carry out upside-down, in view of the following:
To spend adjustment move муфту upwards to a working clamp 4. |