Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment

12.4. A forward guard
THE GENERAL DATA

Forward guard (models the Sedan
)
1. A bolt with шестигранной a head, 23 Н.м.
2. The self-cutting screw, 7.5 Н.м.
3. A guard, the bottom section
It is possible to remove together with the central section
4. The self-cutting screw, 7.5 Н.м.
5. A bolt with шестигранной a head, 23 Н.м.
6. A bearing plate of the lock
It is possible to remove together with the central or bottom section
7. A metal ear
At guard removal pull it directly downwards for a corner
8. The self-cutting screw, 7.5 Н.м.
9. A guard, the central section

Forward guard in gathering (Compartment model)
1. A bolt with шестигранной a head, 23 Н.м.
2. The self-cutting screw with a washer
3. A guard, the central section
4. A guard, the bottom section
5. The self-cutting screw with a washer

Removal

PERFORMANCE ORDER
1) remove a bumper
2) remove a radiator lattice
3) unscrew the decorative panel (arrows)
4) pull out a guard from a condensing ring to the right or to the left

Removal for model the Sedan

PERFORMANCE ORDER
1) through an aperture for access remove the holder of a rope and disconnect a rope
2) unscrew casing screws приточного air (arrow)
3) to remove a guard, pull it downwards under a wing

Removal for Compartment model

PERFORMANCE ORDER
1) remove a bumper
2) remove a radiator lattice
3) disconnect a cowl rope
4) unscrew screws of a decorative covering (arrow) and pull out it from a condensing ring
5) unscrew an air line of cooling air and an arm of a radiator (arrow)
6) unscrew an arm of an oil radiator
7) disconnect the switch of a lantern of motor branch
8) disconnect a connecting loop on the guard panel
9) unscrew directing device of soaked up air (arrow)

Installation

Installation carry out upside-down.


On the main page