| 1) arrange the forward holder (from outside a forward rack of a body) in parallel directing |
|
2) adjust a backlash between the holder and directing to 2.0 mm and push the holder upwards |
|
3) the second spring on (arrow) rope should be completely compressed |
| 4) the maximum free wheeling of 4.0 mm |
| 5) tighten bolts |
| 6) completely lift glass |
|
7) the first line of glass 3 should adjoin to an internal condensing flange 2 butt overlays 1; if is not present: push glass forward on 1.0 mm and anew adjust the holder |
The prevention The butt overlay should be replaced, if glass still does not adjoin to condensing flange 2.
|
| 8) completely lift door glass |
|
9) the upper edge of glass and a finishing covering should generate one line; the lateral aspect has flown down should not be curved; rubber should have equal contact to (arrow) glass |
The prevention Oblong apertures define limits of adjustment of a butt overlay.
|
| 10) check up and adjust |