Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
12.2. The central section of a guard
12.3. A cowl rope
12.4. A forward guard
12.5. A forward wing
12.6. Lock pins of a cowl, the rubber shock-absorber
12.7. A cowl
12.8. A gazonapolnennaja rack (models the Sedan)
12.9. A luggage carrier cover
12.10. A back door (Compartment model)
12.11. A forward door, the bottom door loop
12.12. Adjustment of a window and a bearing element of a door
12.13. Window condensing stoppers, a window regulator
12.14. The door lock
12.15. Draught of lever transfer of the lock
12.16. A rope of an internal door-lock
12.17. A rotary clamp, an adjusting spring
12.18. Adjustment of doors
12.19. A bearing element of a door
12.20. The central lock
12.21. The pump with two modes of forcing
12.22. The leading activator
12.23. The activator of a back door
12.24. The activator of a cover of a luggage carrier
12.25. The activator of a cover of a fuel tank
12.26. Door glass (Compartment model)
12.27. Adjustment of a butt overlay (Compartment model)
12.28. A skeleton of a back door, the bottom loop of a door
12.29. A bearing element of the back door, a condensing stopper
12.30. A rope, шарнирный the lever
12.31. The door handle
12.32. The holder of components of a door
12.33. The hatch
12.34. A bumper casing
12.35. Hermetic sealing of a back bumper
12.36. An extending clamp
12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
12.38. The top overlay of a forward spoiler (Compartment model)
12.39. A back spoiler / a lining of a niche of a wheel
12.40. A back bumper (Compartment model)
12.41. window raiser
12.42. Internal furnish of a body
12.43. Sitting
+ 13. A central air
+ 14. An electric equipment
|
The activator of a cover of a luggage carrier
Removal
| PERFORMANCE ORDER |
| 1) remove decorative furnish of the right back dimensional lantern; for easing of a lock ring the leading activator should be in position "a door is opened" |
| 2) pushing downwards a lock ring, cautiously hold draught of lever transfer 2 |
| 3) extend draught of lever transfer from the activator |
| 4) unscrew assembly bolts and remove a pressure head / vacuum hose |
|
Installation
Installation carry out upside-down, in view of the following:
| PERFORMANCE ORDER |
| 1) the pressure head / vacuum hose should be between draught of lever transfer of the lock and an internal part of the hatch of a luggage carrier |
| 2) to collect draught of lever transfer 2, it is necessary, that the lock and the activator were in open position |
| 3) press draught 2, pushing upwards a lock pin 1 |
|
The activator of a cover of a luggage carrier (Compartment model)
Removal
| PERFORMANCE ORDER |
| 1) remove decorative furnish of the right back dimensional lantern; for easing of a lock ring draught of lever transfer should be in position "a door is opened" |
| 2) cautiously keeping draught of lever transfer, push a lock ring 2 in a direction specified by an arrow |
| 3) pull out draught from the activator |
| 4) remove a pressure head / vacuum hose and unscrew fixing bolts (arrows) |
|
Installation
Installation carry out upside-down, in view of the following:
| PERFORMANCE ORDER |
| 1) the pressure head/vacuum hose should be between draught, the lock and the decorative panel of a luggage carrier |
| 2) to establish draught of lever transfer 1, the lock and the activator should be in position "the door is opened" |
| 3) push draught, a lock ring upwards |
| 4) do not compress draught of lever transfer |
|
|
On the main page
|