Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment

12.19. A bearing element of a door

THE GENERAL DATA

Bearing element of a door, the sizes

In drawing the cross-section section of the left door is shown
The sealing edge 7 should have contact on all contour of a rack and a decorative overlay of a roof 3

With = 3.5 + 1 mm

d = 8.1 + 1 mm

1 – a sealing flange
2 – a door frame
3 – a decorative overlay of a door
4 – a window
5 – a window sealing lining 6 – an internal door sealing lining
7 – a sealing edge
8 – a sealing edge at a window

Adjustment
The prevention
The first windows and a door covering should be adjusted.

Two experts will be necessary for realisation of this operation. Do not press a covering of a door during adjustment.

PERFORMANCE ORDER

1) ослабьте bolts (arrows)

2) close a door

3) slightly press on bearing element in a direction opposite to a roof and a rack; will apply slightly more forces, than it is necessary; the rubber lining will return bearing element in appropriate position

4) at this time the second expert (from within the car) tightens at first top, and then the bottom bolts

Bearing element of a back door, removal / installation

Removal

PERFORMANCE ORDER

1) remove the decorative panel of a door

2) disconnect a rope of the internal uncoupling mechanism of a door

3) disconnect and remove a rope from a bearing element of a door

4) remove a fixing pin 1, having pressed forward on a covering of the lock of a door

5) unscrew bolts with шестигранной a head 2, 3

Installation

Installation carry out upside-down, in view of the following:

Tighten bolts with шестигранной a head with the moment 20 Н.м.
А–А – a cross-section

In = a zone between a roof and a back rack of a body

1 – the adjustable terminator of a regulator of a window

Adjust the top terminator of a regulator of a window so that the upper edge of a window 3 adjoined to condensing flange 2 in a transitive zone In

And = 0 + 0.5 mm

On the main page