2) note glass position in relation to a frame and the holder, as is shown in (insert) drawing
1 – the central rack of a body, top
2 – the central rack of a body, position on the holder
3 – a forward rack of a body, position on the holder
3) half lower a window
4)ослабьте bolts on the holder
5) remove aluminium clamping overlays with sealants
6) remove glass
InstallationThe prevention
On cars with identification number to 8BKA 008300 black plastic substrate should be replaced with a white plastic substrate.
PERFORMANCE ORDER
1) place in the set position a plastic substrate
2) place in the set position has flown down and combine it with marks in a frame and the holder; if original glass is lost or broken, at first place glass between carving apertures
3) cautiously insert glass in the holder, forward and back
4) establish a plastic substrate
5) establish aluminium clamping overlays
6) manually screw up bolts
7) arrange the back holder (from outside the central rack of a body) in parallel directing
8) by means of a wrench pull downwards (marksman) while the spring on a rope will not be compressed completely