Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   - 13.24. The electric equipment of a body
      13.24.1. A technical characteristics
      13.24.2. Electric chains
      + 13.24.3. Detection of not closed chain
      13.24.4. Fuses and the relay
      13.24.5. Replacement of switches
      13.24.6. Removal and installation of sound signals
      13.24.7. Removal and installation of hours
      13.24.8. Removal and installation прикуривателя
      + 13.24.9. A combination of devices
      13.24.10. Removal and installation of a cable of a drive of a speedometer
      13.24.11. Replacement of bulbs
      13.24.12. Removal and installation of the block of a headlight / of the index of turns
      13.24.13. Adjustment of light of headlights
      - 13.24.14. The onboard computer
         13.24.14.1. Replacement of making elements
      + 13.24.15. System of the central blocking
      13.24.16. Seats with heating
      13.24.17. Removal and installation of contact plates and probes of a back door
      13.24.18. Removal and installation of levers and brushes of screen wipers
      13.24.19. Removal and installation of the engine of a screen wiper and draught
      13.24.20. Removal and installation of the engine of a back screen wiper
      13.24.21. Washers of wind and back glass
      13.24.22. Removal and installation of a radio receiver from a player of cartridges
      13.24.23. Removal and installation of loudspeakers
+ 14. Electric schemes





13.24.14.1. Replacement of making elements

THE TEMPERATURE GAUGE

PERFORMANCE ORDER
1. Disconnect a gauge wire in a multicontact socket about the left headlight.
2. Take the gauge of temperature from a nest in a forward bumper and remove it.
3. Installation is made in sequence, return to removal.

THE DISTANCE GAUGE

The distance gauge is located in a speedometer drive on a transmission.

PERFORMANCE ORDER
1. Disconnect a multicontact socket of the gauge, then remove the gauge from a transmission.
2. At presence unscrew a cable of a drive of a speedometer from the gauge and remove the gauge.
3. Installation is made in sequence, return to removal.

FUEL FLOWMETER

The fuel flowmeter is located on a wheel arch.

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Disconnect a multicontact electric socket from a fuel flowmeter.
3. Mark and disconnect fuel hoses from a flowmeter of fuel and close their ends suitable stoppers.
4. Unscrew a bolt and remove a fuel flowmeter.
5. Installation is made in sequence, return to removal.

THE ONBOARD COMPUTER

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Remove a radio receiver.
3. Take the onboard computer from a nest and disconnect from it an electric socket.
4. Installation is made in sequence, return to removal.
5. At installation of its new onboard computer it is necessary откалибровать on the car at servicing deport.

ILLUMINATION OF THE DISPLAY OF THE COMPUTER

PERFORMANCE ORDER
1. Remove the onboard computer.
2. Using flat-nose pliers, turn a cartridge with a bulb and take it from a back part of the onboard computer.
3. Installation is made in sequence, return to removal.

On the main page