THE SWITCH ON THE DOOR OF THE DRIVER
| PERFORMANCE ORDER |
| 1. Remove a door upholstery. |
| 2. Remove from a door a protective film about the switch. |
| 3. Unscrew two screws, disconnect an electric socket of the switch and disconnect the switch from drive the lock lever. |
| 4. Remove the switch. |
| 5. Installation is made in sequence, return to removal. |
| 6. If necessary replace rubber pillows of the switch. |
|
SERVOMOTOR OF THE PASSENGER AND BACK DOOR
Switch replacement is made similarly, as well as replacement of the switch by doors of the driver (see above).
SERVOMOTOR OF THE COVER OF THE LUGGAGE CARRIER ON MODELS THE SEDAN
| PERFORMANCE ORDER |
|
1. Open a cover of a luggage carrier and remove from it plastic furnish. |
|
2. Unscrew two nuts, fastening the mechanism of a latch and two screws, fastening a servomotor (1 – nuts of fastening of a latch of a cover of a luggage carrier, 2 – servomotor screws, 3 – draught). |
| 3. Remove a servomotor from a latch and disconnect from it an electric socket. |
| 4. Installation is made in sequence, return to removal. |
|
THE MANAGEMENT BLOCK
| PERFORMANCE ORDER |
| 1. Remove the furnish panel in deepening for feet of the forward passenger. |
| 2. On models with system of injection of fuel unscrew and move aside the block of management of system of injection of fuel together with an arm. |
| 3. Unscrew the screw of fastening of an arm of the block of management. |
| 4. Remove the management block together with an arm, then disconnect from it an electric socket and unscrew an arm. |
| 5. Installation is made in sequence, return to removal. |
|
|