Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   - 4.3. Engine DOHC with 16 valves
      4.3.1. A technical characteristics
      4.3.2. Compression check
      + 4.3.3. The operations demanding removal of the engine
      4.3.4. Removal of auxiliary components of the engine
      4.3.5. Removal and installation of the valve of adjustment of pressure of oil
      + 4.3.6. A gear belt
      4.3.7. Removal and installation of the mechanism of a tension of a gear belt and rollers
      4.3.8. Removal, check and installation of camshafts
      + 4.3.9. A head of the block of cylinders
      4.3.10. Removal and installation of the oil pallet and маслоотражательной plates
      + 4.3.11. The oil pump
      4.3.12. Removal and installation of the valve of the thermostat of an oil radiator
      + 4.3.13. Pistons and rods
      4.3.14. Removal and flywheel installation
      + 4.3.15. Replacement of sealing rings
      4.3.16. Removal, check and installation of bearings of a cranked shaft
      4.3.17. Check of components of the engine
      4.3.18. Removal and engine installation
      4.3.19. Start of the engine after major repairs
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

4.3.10. Removal and installation of the oil pallet and маслоотражательной plates Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a wire of weight from the accumulator.
2. Merge engine oil.
3. Remove a final collector.
4. Disconnect an electric socket from the gauge of level of engine oil.
5. Remove a protective plate of a flywheel.
6. In regular intervals and gradually unscrew bolts of fastening and remove the oil pallet. Keep in mind that on the majority of models маслоотражательную the plate of the oil pallet can be moved on considerable distance from the block of cylinders together with the oil pallet, but it cannot be removed until the tube of the oil pump will be removed маслозаборная.
7. For removal маслозаборной tubes of the oil pump unscrew a bolt, крепящий an arm to the block of cylinders, and two bolts, fastening the end маслозаборной tubes to the oil pump. Remove a sealing ring of round section.
8. Remove linings of the oil pallet, then clear interfaced surfaces of the block of cylinders, маслоотражательной a plate and the oil pallet of traces of an old lining and hermetic.

Installation

PERFORMANCE ORDER
1. Apply a thin film hermetic Opel №90485251 on interfaced surfaces between the oil pump and the block of cylinders and between a back cover of the radical bearing and the block of cylinders.
2. Apply a thin film hermetic on a new lining of the oil pallet and establish it on the block of cylinders on directing pins.
3. Establish маслоотражательную a plate on the block of cylinders. Establish маслозаборную a tube on the oil pump with a new sealing ring of round section and fix bolts, having tightened their demanded moment. Before ввинчиванием fastening bolts маслозаборной tubes put on a carving of bolts the means interfering their unscrewing.
4. Establish and screw to the block of cylinders a support arm маслозаборной tubes.
5. Establish the second lining without hermetic between the oil pallet and маслоотражательной a tube.
6. Put on a carving of bolts of fastening of the oil pallet the means interfering their unscrewing, then establish the oil pallet and fix bolts, having tightened their demanded moment.
7. If the engine is established in the car, the further installation is made in sequence, return to removal. Fill in in the engine engine oil.


On the main page