Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   - 4.3. Engine DOHC with 16 valves
      4.3.1. A technical characteristics
      4.3.2. Compression check
      + 4.3.3. The operations demanding removal of the engine
      4.3.4. Removal of auxiliary components of the engine
      4.3.5. Removal and installation of the valve of adjustment of pressure of oil
      - 4.3.6. A gear belt
         4.3.6.1. Removal of a gear belt
         4.3.6.2. Installation of a gear belt
         4.3.6.3. Adjustment of a gear belt
      4.3.7. Removal and installation of the mechanism of a tension of a gear belt and rollers
      4.3.8. Removal, check and installation of camshafts
      + 4.3.9. A head of the block of cylinders
      4.3.10. Removal and installation of the oil pallet and маслоотражательной plates
      + 4.3.11. The oil pump
      4.3.12. Removal and installation of the valve of the thermostat of an oil radiator
      + 4.3.13. Pistons and rods
      4.3.14. Removal and flywheel installation
      + 4.3.15. Replacement of sealing rings
      4.3.16. Removal, check and installation of bearings of a cranked shaft
      4.3.17. Check of components of the engine
      4.3.18. Removal and engine installation
      4.3.19. Start of the engine after major repairs
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

4.3.6. A gear belt

4.3.6.1. Removal of a gear belt
THE GENERAL DATA
The prevention

At installation it is necessary to use a new gear belt. For removal of a pulley of a cranked shaft it is necessary to use a stripper.

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove the bottom mudguard of the engine and a mudguard of an arch of a wheel.
2. Remove a wire of weight from the accumulator.
3. Loosen the collars also remove the air branch pipe connecting the air filter with a measuring instrument of a stream of air.
4. Remove the air filter.
5. At presence remove приводной a belt of the pump of the amplifier of the steering mechanism and приводной a generator belt.
6. Unscrew three bolts and remove an external casing of a gear belt. Take rubber sealing rings from apertures under bolts in a casing.
7. Take rubber sealing rings from apertures under bolts in a casing.
8. Remove consolidations from a cover of a gear belt.
9. Loosen the six bolts of fastening of a pulley auxiliary drive a belt to a pulley of a gear belt of a cranked shaft. For deduction of a cranked shaft of the engine from проворачивания if the engine is established in the car, the assistant should include any transfer and press a brake. If the engine is removed from the car, keep a cranked shaft from проворачивания a wrench for the central bolt of a cranked shaft. For access improvement unscrew a collar of fastening of an oil radiator from the interior of a wing.
10. For a bolt of fastening of a pulley of a cranked shaft turn a cranked shaft of the engine in a direction of working rotation before combination of adjusting labels on pulleys with indexes.
11. Combination of label ВМТ on a pulley of a cranked shaft with the index on a back casing of a gear belt.
12. Combination меткок ВМТ (are specified by arrows) on pulleys of camshafts with indexes on a cover.
13. Unscrew six bolts and remove a pulley auxiliary drive a belt from a cranked shaft.
14. Loosen the a bolt of fastening of a pulley of the mechanism of a tension of a gear belt, then take away a pulley from a gear belt and remove a gear belt from pulleys.
15. Do not turn a cranked shaft of the engine at the removed gear belt as there can be an impact of pistons to open valves.


On the main page