Subaru Legacy/Outback

1999-2003 of release

Repair and car operation


Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Details of a lining of onboard electroconducting
   System of additional safety (SRS) - the device and a functioning principle
   Diagnostics of malfunctions SRS
   Removal and installation of components SRS
   Control system of speed (темпостат) - the device and a functioning principle
   Check of serviceability of functioning of components and problem diagnostics темпостата
   Removal, check of a condition and installation of components of a control system by speed
   Combination of devices - the general information and a principle of functioning of components
   Problem diagnostics of components of a combination of devices
   Removal, service and installation of a combination of devices, check of a condition of components
   Heating of back glass and rear-view mirrors - the general information, check of serviceability of functioning of components, regenerative repair of a thermoelectric heating element
   Heating of brushes of screen wipers - the general information, check of serviceability of functioning of components, regenerative repair of a thermoelectric heating element
   Removal, check of a condition and installation of switches of management by functioning of the electric drive of regulators Glass lifts
   The electric drive of rear-view mirrors - check of serviceability of functioning
   Removal check and installation of the switch of management by functioning of the electric drive of external rear-view mirrors
   Removal, check of a condition and installation of the switch of management by functioning of the electric drive of the top hatch
   Removal, check of a condition and installation combined подрулевых switches
   Check of serviceability of functioning of electromotors of a drive of screen wipers, removal, check and installation of the operating relay of a back screen wiper on models Legacy of Universal/Outback
   Check of the relay and switches of lighting and alarm devices
   Removal and installation of lighting devices, replacement of lamps
   Removal, check of a condition and installation of small horns and the horn switch
   Check of a condition and replacement of contact group of the switch of ignition
   The uniform lock - the device, a functioning principle, diagnostics of malfunctions
   Removal, check of a condition and installation of components of the uniform lock
   System иммобилизации the engine - the device, a functioning principle, diagnostics of malfunctions
   Removal and installation of components of system иммобилизации the engine
   Removal and installation of assemblage of a radio receiver
   Removal and installation of loudspeakers
   Check of a condition and regenerative repair of the window aerial of a radio receiver
   Removal, installation and check of a condition of the antenna amplifier of a radio receiver
   Removal and installation прикуривателя
   + Schemes of electric connections

Check of the relay and switches of lighting and alarm devices

 Schemes of connection of the relay and switches see in Schemes of electric connections.


The relay of head headlights

 PERFORMANCE ORDER

1. Connect the battery between plugs №№ 4 (+) and 3 (-) the relay and measure resistance between plugs №№ 1 and 2. At giving of a food the result of measurement should make less than 1 Ohm, at food switching-off - more than 1 МОм.

2. The faulty relay replace.


The relay of dimensional fires and illumination of devices

 PERFORMANCE ORDER

1. Check is made as well as for the relay of head headlights.
2. The faulty relay replace.


The relay and the switch of antifog headlights

The switch

 PERFORMANCE ORDER

1. Check up correctness of distribution of conductivity between plugs №№ 3 and 5 contact sockets of the switch in both positions of the last. At the closed switch the result of measurement should make less than 1 Ohm, at opened, - more than 1 МОм.

2. The faulty switch replace.


The relay and the switch of back foggy lanterns

The switch

 PERFORMANCE ORDER

1. Include ignition and head/antifog headlights.
2. Press the button of the switch and make sure of serviceability of activation of foggy lanterns.
3. The faulty switch replace.


The switch of back foggy lanterns

See Has undressed Removal, check of a condition and installation combined подрулевых switches.

The alarm system switch

 PERFORMANCE ORDER

1. Check up correctness of distribution of conductivity between plugs of a contact socket of the switch in both positions of the last (see the table).


2. The faulty switch hush up.



The breaker of indexes of turns/alarm systems

 PERFORMANCE ORDER

1. Connect to the module of the breaker the battery and a lamp of the index of turns. The uniform blinking of a lamp will testify to serviceability of functioning of the breaker at giving in a pressure contour.

2. The faulty breaker is subject to replacement.


The gauge-switch of fires of a backing (model with РКПП)

 PERFORMANCE ORDER

1. Measure resistance between plugs № 1 and № 2 contact sockets of the gauge-switch. At the included reverse gear the result of measurement should make less than 1 Ohm, in all other positions of the lever of a gear change, - more than 1 МОм.
3. The faulty gauge-switch replace.


The gauge-switch razre-shenija start (model with АТ)

 PERFORMANCE ORDER

1. Measure resistance between plugs № 1 and № 2 gauges-switches. In position «R» the lever of selector AT the result of measurement should make less than 1 Ohm, in all other positions of the lever, - more than 1 МОм.

2. The faulty gauge-switch replace.


The gauge-switch of stoplights

 PERFORMANCE ORDER

1. Measure resistance between plugs № 1 and № 2 (models without темпостата) / № 2 and № 3 (models with темпостатом). At the squeezed out pedal of a foot brake the result of measurement should make less than 1 Ohm, at released, - more than 1 МОм.

2. The faulty gauge-switch replace.


Drive of adjustment of position of headlights

Actuation mechanism

 PERFORMANCE ORDER

Include headlights and visually make sure of serviceability of functioning of the servo-driver while translating the operating switch in each of six working positions (0-1-2-3-4-5).


The operating switch

 PERFORMANCE ORDER

1. Connect to a contact socket of the switch the battery, a tester and the resistor on 500 ÷ 800 Ohm. Measure a current strength, passed in a diagnostic chain in each of working positions of the switch (see the table).


2. The faulty switch replace.


Left combined подрулевой the switch

See Has undressed Removal, check of a condition and installation combined подрулевых switches.

Door gauges-switches of activation of devices of internal illumination

Gauges-switches of lateral doors

 PERFORMANCE ORDER

1. Measure resistance between plugs № 1 and № 3 gauges-switches of each of car doors. At an open door the result of measurement should make less than 1 Ohm, at closed, - more than 1 МОм.

2. Faulty gauges-switches replace.


The gauge-switch of a latch of the lock of a door of a back

 PERFORMANCE ORDER

1. Measure resistance between plugs № 1 and № 2 gauges-switches. At an open door the result of measurement should make less than 1 Ohm, at closed, - more than 1 МОм.
2. Faulty gauges-switches replace.


The gauge-switch of a cover of a luggage space

 PERFORMANCE ORDER

1. Measure resistance between plugs № 1 and № 2 gauges-switches. At an open cover the result of measurement should make less than 1 Ohm, at closed, - more than 1 МОм.
2. Faulty gauges-switches replace.


The switch main салонного the fixture

 PERFORMANCE ORDER

1. Measure resistance between plugs of a contact socket in all working positions of the switch. Compare results of measurement to table requirements.


2. The faulty switch replace.

Switches directed салонных fixtures

 PERFORMANCE ORDER

Measure resistance between plugs № 1 and № 2 contact sockets of electroconducting of the fixture. In the closed position of the switch the result of measurement should make 18 ± 5.4 Ohm, in opened, - more than 1 МОм.

The switch of a lantern of illumination of a luggage space (model Legacy of Universal/Outback)

 PERFORMANCE ORDER

1. Measure resistance between plugs of a contact socket in all working positions of the switch. Compare results of measurement to table requirements.


2. The faulty switch replace.

Check of the relay of a horn

 PERFORMANCE ORDER

Connect the battery between plugs № 4 and № 3 relays and measure resistance between plugs № 1 and № 2 relays. At the connected food the result of measurement should make more than 1 МОм, at the disconnected battery, - less than 1 Ohm. The faulty relay replace.


On the main page