Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
Specifications
Search of causes of failures of an electric equipment
Safety locks - the general information
Chain breakers - the general information
The relay - the general information and check of serviceability of functioning
Details of a lining of onboard electroconducting
System of additional safety (SRS) - the device and a functioning principle
Diagnostics of malfunctions SRS
Removal and installation of components SRS
Control system of speed (темпостат) - the device and a functioning principle
Check of serviceability of functioning of components and problem diagnostics темпостата
Removal, check of a condition and installation of components of a control system by speed
Combination of devices - the general information and a principle of functioning of components
Problem diagnostics of components of a combination of devices
Removal, service and installation of a combination of devices, check of a condition of components
Heating of back glass and rear-view mirrors - the general information, check of serviceability of functioning of components, regenerative repair of a thermoelectric heating element
Heating of brushes of screen wipers - the general information, check of serviceability of functioning of components, regenerative repair of a thermoelectric heating element
Removal, check of a condition and installation of switches of management by functioning of the electric drive of regulators Glass lifts
The electric drive of rear-view mirrors - check of serviceability of functioning
Removal check and installation of the switch of management by functioning of the electric drive of external rear-view mirrors
Removal, check of a condition and installation of the switch of management by functioning of the electric drive of the top hatch
Removal, check of a condition and installation combined подрулевых switches
Check of serviceability of functioning of electromotors of a drive of screen wipers, removal, check and installation of the operating relay of a back screen wiper on models Legacy of Universal/Outback
Check of the relay and switches of lighting and alarm devices
Removal and installation of lighting devices, replacement of lamps
Removal, check of a condition and installation of small horns and the horn switch
Check of a condition and replacement of contact group of the switch of ignition
The uniform lock - the device, a functioning principle, diagnostics of malfunctions
Removal, check of a condition and installation of components of the uniform lock
System иммобилизации the engine - the device, a functioning principle, diagnostics of malfunctions
Removal and installation of components of system иммобилизации the engine
Removal and installation of assemblage of a radio receiver
Removal and installation of loudspeakers
Check of a condition and regenerative repair of the window aerial of a radio receiver
Removal, installation and check of a condition of the antenna amplifier of a radio receiver
Removal and installation прикуривателя
+ Schemes of electric connections
|
Check of a condition and replacement of contact group of the switch of ignition
|
The ignition switch is equipped by the alarm buzzer informing the driver about necessity of extraction turned in position LOCK or АСС of a key at opening of the left forward door, - for switching-off of a buzzer it is enough to take a key from the lock. |
Check
|
1. Remove the bottom section of furnish of the panel of devices (the Body see the Head). 2. Remove the bottom cover of a casing of a steering column (the Suspension bracket and a steering see the Head). 3. Release a clamp and disunite a contact socket of electroconducting of the switch of ignition on a plait кузовной electroconductings. 4. Turning an ignition key plate in each of working positions, measure resistance between corresponding plugs of a contact socket of the switch. Compare results of measurements to the requirements stated in the table.
5. Faulty contact group replace (see more low). |
|
Replacement
|
1. Disconnect a negative wire from the battery. 2. Remove a steering column (the Suspension bracket and a steering see the Head) and clamp it in a vice with soft sponges.
|
3. Drill fixing bolts and remove contact group. |
|
4. Installation is made upside-down, - do not forget to replace fixing bolts. |
|
|
|
On the main page
|