Audi A3

Since 1997 of release

Repair and car operation



Audi A3
+ The maintenance instruction
- Current leaving and service
   The routine maintenance schedule
   The general information on adjustment
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure in them
   Replacement of impellent oil and the oil filter
   Check of a gear belt of drive ГРМ on presence of damages, deterioration measurement
   Check of brake system
   Check of fuel system
   Rotation and replacement of wheels. Chains противоскольжения
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of functioning of system of cooling
   Check of a condition of system of release of the fulfilled gases
   Visual check of tightness of a box of a gear change
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Greasing of clamps of doors and the lock cylinder
   Condition check, adjustment and replacement of brushes of screen wipers
   The visual control of a seat belt and the block of a pillow of safety
   Check of a condition of the battery, care it and gymnastics
   Level check трансмиссионного oils РКПП
   Replacement of the filter of air of salon
   Replacement of a filtering element of the air filter
   Replacement of a brake liquid
   Check and replacement of spark plugs
   Replacement of the fuel filter of the diesel engine
   Check of level of a liquid of system of hydrostrengthening of a wheel
   Check of level of a liquid of the main transfer of automatic transmission
   Oil replacement in coupling Haldex of models with a full drive
   Condition check drivers ridge belts
   Level check трансмиссионной liquids АТ
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electroschemes





Check of a condition of protective covers of power shafts

PERFORMANCE ORDER
1. Protective covers of power shafts are very important elements since they protect hinges of equal angular speeds (SHRUS) from hit on them a dirt, water and other extraneous subjects causing damages. External pollution of protective covers by oil and greasings can lead to premature failure of a material of covers, therefore it is recommended to wash periodically covers with water with soap.
2. Examine covers on presence of ruptures and cracks, and also the weakened collars. In case of detection of signs of cracks or leak of greasing the cover should be replaced.
3. At the same time check up the general condition of hinges of equal angular speeds, holding a shaft and simultaneously trying to turn a wheel. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any appreciable люфт specifies in deterioration of the hinge, deterioration in grooves of a shaft or отворачивание a lock nut of a shaft.
On the main page