Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators Glass lifts door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive door Glass lifts
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External кузовная furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes





Removal, installation and adjustment of doors

Removal

 PERFORMANCE ORDER

1. On models with laid in door panels electroconducting execute following procedures:
   a) Disconnect a negative wire from the battery;
   b) Remove the panel of an internal upholstery of a door and the sealing screen (Removal and installation of panels of an internal upholstery of doors see);
   c) Through an aperture in a doorframe disunite contact sockets of electroconducting and liberate a plait (wires from all provided clamps. Try to remember a route of a lining of a plait (ов);
   d) Liberate the rubber plug of a plait of wires through passage from a forward end face of a door and pass electroconducting through an aperture in a frame.

2. Отболтите from кузовной racks the terminator of opening of a door.

3. Ask the assistant to support a door, or prop up door sideways a jack through wooden брусок.

4. Having made sure of reliability of fixing of a door, отболтите also take axial fingers of both loopy assemblages. Remove a door.

Installation

Installation is made upside-down. Pay attention to following moments:
   a) do not forget to grease axial fingers of loopy assemblages with assembly greasing;
   b) At a corresponding complete set track correctness of a lining of a plait (ов) electroconductings and reliability of fastening of contact sockets;
   c) the Description of procedures installation of the sealing screen and the panel of an internal upholstery of a door is resulted in section Removal and installation of panels of an internal upholstery of doors.

Adjustment

Adjustment demands from the executor of enough high qualification and certain skills that is why, its performance will charge more correctly to experts of car-care centre.

On the main page