Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators Glass lifts door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive door Glass lifts
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External кузовная furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes

Removal and installation of elements of internal furnish of salon

Casings of a steering column

Removal

 PERFORMANCE ORDER

1. Remove steering wheels (address to the Head the Running gear and a steering).

2. Turn out two screws under a steering column and remove the top casing of last.

3. Turn out the right screw of fastening of the bottom casing to a ledge on column assemblage.

4. Remove the bottom casing from a column, then liberate from it a rheostat of management of intensity of illumination of the panel of devices and disconnect electroconducting. Remove a casing.

Installation

Installation is made upside-down.

Panels of an internal upholstery of doors

Removal and installation of panels of an internal upholstery of doors see.

Panels of internal furnish of salon and luggage space

For fastening of panels screws and various type clamps are used. The order of removal of panels is usually quite obvious.

Carpet covering

For floor facing two sections of a carpet covering are used. Sections fasten to panels of a floor by means of screws or clamps. The usually same fixture is used for fixing of interfaced panels of furnish of walls of salon.

Removal of a carpet covering is not connected with any special difficulties, however, is interfaced to considerable time expenses as demands preliminary removal of seats, the central console, анкерных knots of seat belts and interfaced vertical panels of furnish.

Ceiling upholstery

The ceiling upholstery fastens to a roof of the car by means of clamps. For removal of a ceiling upholstery it is necessary to dismantle preliminary such elements of the equipment of salon, as поручневые handles, sun-protection peaks, various finishing panels, and also sealing strips of doorways and an aperture of the top hatch.

It is necessary to notice that dismantle of a ceiling upholstery demands from the executor of certain skills and is connected with risk of damage обивочного a material that is why, it will be reasonable to charge its performance to experts of car-care centre.


On the main page