Citroen Xantia

1. Lower a windowpane on two third of its course, then remove the panel of an internal upholstery and the sealing screen of a door (Removal and installation of panels of an internal upholstery of doors see).

2. From the interior of a door release a plastic clamp of fastening of a windowpane to a regulator: for what develop a clamp on 45 °, remove it, then liberate glass from the regulator mechanism.

3. Remove a sealing strip from a bottom edge of a window aperture.

4. Ask the assistant and to take its glass in the lifted position, or lift glass and fix its adhesive tape.

5. In a forward part of a door give a nut of fastening of a forward directing runner of glass. Take a runner through an aperture in a doorframe.

6. Remove a sealing strip from back edge of a window aperture and take glass from a door.

1. Freely fill on a regular place a forward directing runner, then lower glass at a door and fix it on a regulator a plastic clamp, having tracked reliability защелкивания the last.
2. Correct position of a directing runner and fix its nut.

3. Establish a sealing strip on back edge of a window aperture, having tracked, that the directing ledge on back to glass edge has got to a trench of a rubber strip. Make sure of density of landing of a sealing strip.

4. Plant a sealing strip from within on a bottom edge of a window aperture.
5. Establish on a door the plastic sealing screen and the panel of an internal upholstery (Removal and installation of panels of an internal upholstery of doors see).

1. Completely lift a windowpane, then remove the panel of an internal upholstery and the plastic sealing screen of a door (Removal and installation of panels of an internal upholstery of doors see).

2. In the bottom back corner of a door turn out the screw of fastening of a directing trench of a windowpane.

3. Then take a trench through an aperture at doors.

4. Completely lower glass, develop under 45 ° and remove a plastic clamp, then liberate glass from the regulator mechanism.
5. Remove a sealing strip from a bottom edge of a window aperture.
6. Remove a sealing strip from back edge of a window aperture and take glass from a door.

1. Freely fill on the regular place a back directing trench, then lower glass at a door and fix its plastic clamp on a regulator window lifterа. Track reliability защелкивания a clamp.
2. Correct position of a directing trench so that its upper edge has entered into gearing with a uvula in the top part of a door, then screw and tighten the fixing screw.
3. Plant a sealing strip on back edge of a window aperture (track hit in a groove of a strip of a directing ledge of glass). Make sure of density of landing of a strip.
4. Plant a sealing strip from within on a bottom edge of a window aperture.
5. Establish the plastic sealing screen and the panel of an internal upholstery of a door (Removal and installation of panels of an internal upholstery of doors see).

1. Lower door glass on two third of its course, then remove the panel of an internal upholstery and the plastic sealing screen of a door (Removal and installation of panels of an internal upholstery of doors see).
2. From the interior of a door release a plastic clamp of fastening of glass to a regulator window lifterа: turn under 45 ° and remove a clamp, then liberate glass from the regulator mechanism.
3. Lift glass in the top position and fix its adhesive tape. Make sure of reliability of fastening of glass.
4. Through an aperture in a doorframe disconnect electroconducting from the drive electromotor window lifterа.

5. Give three nuts of fastening of assemblage of the electromotor, then two more with which the directing runner of glass fastens.

A — three nuts of fastening of assemblage of the electromotor of a drive window lifterа
In — two nuts of fastening of a directing runner

6. Take assemblage through an aperture at doors.