Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators Glass lifts door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive door Glass lifts
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External кузовная furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes





Removal, installation and cowl adjustment

Removal

 PERFORMANCE ORDER

1. Ask the assistant to take a cowl opened and lead round a marker contours of both loopy laths.
2. Disconnect from the cowl of a tee located from the bottom party a hose of giving of a liquid of washing of a windscreen. Prepare for gathering of a spilt liquid.
3. Serially from each of car boards turn out fixing screws and disconnect tyres of grounding of a cowl.
4. Turn out fixing bolts and by means of the assistant remove a cowl from the car and transfer it to a safe place.
5. Estimate люфт axial fingers of loopy assemblages, in case of need replace the worn out components. Each of loops приболчивается to a car body. Before cowl installation grease loopy laths with universal greasing.

Installation and adjustment

 PERFORMANCE ORDER

1. By means of the assistant get a cowl on the regular place and freely screw fixing bolts. Achieve an adequate arrangement of loopy laths in the contours led round by a marker, then strongly tighten bolts. Connect to a tee a hose of giving of a liquid of washing of a windscreen.
2. Connect tyres of grounding and strongly tighten bolts of their fastening.
3. Close a cowl and check up uniformity of its arrangement concerning adjoining кузовных panels. In case of need ослабьте loopy bolts also make corresponding updating. Having achieved satisfactory result, do not forget to tighten fixing bolts.
4. The height of position of a first line of a cowl is corrected by means of the rubber buffers located in forward corners. Take the buffer, then ослабьте a counternut and in appropriate way adjust position of a buffer bolt. Again tighten a counternut and return into place the buffer.
5. Having achieved adequate position of a cowl check up serviceability of functioning of latches of its locks. In case of need ослабьте fixing bolts also adjust position замковой assemblages (ок). Do not forget to tighten fixture.


On the main page