Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
- Body and salon furnish
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal and installation of locks of a cowl
   Removal, installation and adjustment of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of regulators Glass lifts door windows
   Removal, installation and adjustment of a door of a back and its telescopic emphasis
   Removal and installation of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive door Glass lifts
   Removal and installation of door rear-view mirrors and accompanying components
   Windscreen, glass of a door of a back and the other fixed glasses - the general information
   The top hatch - the general information
   External кузовная furnish
   Removal and installation of seats
   Removal and installation of seat belts
   Removal and installation of elements of internal furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


Removal and installation of a forward bumper

Removal

 PERFORMANCE ORDER

1. Having hooked, take fastening clamps to a bumper of panels of protection of wings (локеров).

2. Having hooked, remove access covers in локерах arches of forward wheels.

3. Operating through opened apertures, give bolts of fastening of a bumper.

4. Through arches of wheels turn out lateral screws of fastening of a bumper to wings.

5. From under the car turn out three bottom screws of fastening of a bumper.

6. At a corresponding complete set remove forward antifog headlights (address to the Head the Onboard electric equipment).

7. Through apertures under installation of antifog headlights turn out back bolts of fastening of a forward bumper (on one from each party).

8. Delay a bumper forward.

9. On models with a corresponding complete set do not forget to disunite contact sockets of electroconducting of antifog headlights.

Installation

Installation is made upside-down. At a corresponding complete set do not forget to connect electroconducting to antifog headlights.

On the main page