Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
- 4.1. Engine OHV (with a camshaft in the block of cylinders)
4.1.1. A technical characteristics
4.1.2. Compression check
4.1.3. The repair operations which are not demanding removal of the engine
+ 4.1.4. The repair operations demanding removal of the engine
4.1.5. Adjustment of backlashes of valves
+ 4.1.6. A head of the block of cylinders
4.1.7. Removal and installation of the oil pallet
+ 4.1.8. The oil pump
+ 4.1.9. Mechanism asterisks timing
+ 4.1.10. Pistons and rods
4.1.11. Removal and flywheel installation
4.1.12. Removal and installation of support of the power unit
4.1.13. Removal and installation of a camshaft and pushers
4.1.14. Removal and installation of a back sealing ring of a cranked shaft
4.1.15. Removal and installation of a cranked shaft and radical bearings
+ 4.1.16. Check of elements of the engine
4.1.17. System of greasing of the engine
4.1.18. Removal and engine installation
4.1.19. Start of the engine after major repairs
+ 4.2. Engines OHC
+ 4.3. Engine DOHC with 16 valves
+ 4.4. Diesel engines 16D and 16DА
+ 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Following operations can be carried out, without removing the engine from the car:
– Adjustment of backlashes of valves;
– Removal and installation of a head of the block of cylinders;
– Removal and installation of the oil pallet;
– Removal and installation of the oil pump;
– Removal and installation of asterisks of a drive газораспределительного the mechanism;
– Removal and installation of pistons and rods;
– Removal and flywheel installation;
– Removal and installation of the power unit. |
On the main page
|