Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   - 4.1. Engine OHV (with a camshaft in the block of cylinders)
      4.1.1. A technical characteristics
      4.1.2. Compression check
      4.1.3. The repair operations which are not demanding removal of the engine
      + 4.1.4. The repair operations demanding removal of the engine
      4.1.5. Adjustment of backlashes of valves
      + 4.1.6. A head of the block of cylinders
      4.1.7. Removal and installation of the oil pallet
      + 4.1.8. The oil pump
      - 4.1.9. Mechanism asterisks timing
         4.1.9.1. Removal of asterisks
         4.1.9.2. Installation of asterisks
      + 4.1.10. Pistons and rods
      4.1.11. Removal and flywheel installation
      4.1.12. Removal and installation of support of the power unit
      4.1.13. Removal and installation of a camshaft and pushers
      4.1.14. Removal and installation of a back sealing ring of a cranked shaft
      4.1.15. Removal and installation of a cranked shaft and radical bearings
      + 4.1.16. Check of elements of the engine
      4.1.17. System of greasing of the engine
      4.1.18. Removal and engine installation
      4.1.19. Start of the engine after major repairs
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

4.1.9. Mechanism asterisks timing

4.1.9.1. Removal of asterisks

PERFORMANCE ORDER
1. Remove a cap and ослабьте bolts of fastening of a forward right wheel. Lift a forward part of the car and fix on supports. Remove the right forward wheel.
2. Unscrew four bolts and remove a plate opening access to coupling and located in the basis картера of coupling.
3. Loosen the nuts and bolts of fastening of the generator, move the generator to the engine and remove auxiliary приводной a belt from pulleys.
4. Fix a flywheel from проворачивания, having inserted a screw-driver edge between teeths of a flywheel and a cover. Unscrew a bolt of fastening of a pulley of a cranked shaft and remove a pulley.
5. Unscrew bolts, fastening a cover of asterisks to a forward part of the engine and uncover.
6. Note orientation and remove an oil reflector from a cranked shaft.
7. Temporarily establish a pulley of a cranked shaft and for a bolt of fastening of a pulley turn a cranked shaft of the engine in such position that шпонка () on an asterisk of a cranked shaft has been directed upwards, and labels on asterisks () have been directed to each other. Remove a pulley of a cranked shaft.
8. Unscrew two bolts and remove the tension mechanism приводной chains. It is used two types of mechanisms of a tension: simply with a spring or with oil giving under pressure. The mechanism with oil giving under pressure limits pressure of oil to exclude premature emission of elements of the mechanism of a tension.
9. Unscrew a bolt of fastening of an asterisk of a camshaft and remove it together with a washer. For keeping of an asterisk from проворачивания at bolt unscrewing insert through an aperture of an asterisk a screw-driver and arrange it on a plate of fastening of a camshaft.
10. Using a screw-driver edge, remove asterisks of distributive and cranked shaft together with приводной a chain.
11. Wash out details in kerosene and dry up them. Clear the rests of a lining from interfaced surfaces of a cover and the block of cylinders of the engine.

On the main page