Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Design and principle of functioning of elements of the hydrostrengthened steering drive - the general information
      Adjustable safety steering column - the general information
      Removal and steering wheel installation
      Removal, check of a condition and installation карданного the hinge of a steering column
      Removal, service and installation of a steering column
      Removal, service and installation of the steering mechanism
      Removal, installation and check of a condition of elements of hydraulic path ГУР
      Removal, service and installation of the steering pump
      Removal and installation of the tank of liquid ГУР
      Check and replacement of liquid ГУР, removal of air from a hydraulic path
   + Wheel assemblages, suspension bracket geometry
+ Body
+ Onboard electric equipment

Adjustable safety steering column - the general information

The mechanism of adjustment of height of position of a steering column

The design of the mechanism of fixing of a steering column allows to regulate height of position of a steering wheel within a range of 35 mm.

The mechanism of adjustment of height of position of a steering column

1 — the Adjustable steering column

2 — the Lever отпускания the fixing mechanism


Operation principle ударопоглощающих mechanisms

1 — Sreznaja a plate
2 — Kulachkovye clamps

4 — Before cutting
5 — After cutting


Safety ударопоглощающий the mechanism

For the purpose of repayment of energy of blow displaced at a head-on collision back the power unit in a tube of a steering column are established кулачковые the clamps collapsing at excess by the arising overload of some certain value. At destruction of clamps they adjoin мысками with each other, perceiving on itself bending column loading.

One more adaptation to absorb energy of longitudinal blow the plate established between a steering column and an arm fixed on a bearing beam of the fixing mechanism of adjustment of height of position of a column is called срезная. At excess by an arising overload of some certain value the plate emphasis is cut off, dynamically absorbing energy of blow.

Bearing beam of a steering column

Fastening of a steering column is provided by means of the bearing beam established across the car. The beam takes places on the minimum possible removal from a steering wheel for the purpose of the maximum decrease in console loading. The top bearing of a steering shaft also is established as it is possible more close to a steering wheel, providing the reliable support guaranteeing the fullest repayment of vibrations arising during movement.


On the main page