Subaru Legacy/Outback

1999-2003 of release

Repair and car operation


Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Design and principle of functioning of elements of the hydrostrengthened steering drive - the general information
      Adjustable safety steering column - the general information
      Removal and steering wheel installation
      Removal, check of a condition and installation карданного the hinge of a steering column
      Removal, service and installation of a steering column
      Removal, service and installation of the steering mechanism
      Removal, installation and check of a condition of elements of hydraulic path ГУР
      Removal, service and installation of the steering pump
      Removal and installation of the tank of liquid ГУР
      Check and replacement of liquid ГУР, removal of air from a hydraulic path
   + Wheel assemblages, suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal and steering wheel installation

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Result forward wheels in rectilinear position.
3. Remove the module of a pillow of safety (the Onboard electric equipment see the Head).

4. Give a fixing nut and by means of a special stripper remove a steering wheel from a pin of a steering shaft, preliminary having marked its adjusting position.

5. Check up a steering wheel on presence of signs of deformations, estimate a condition of spokes. In case of need replace a steering wheel.

INSTALLATION

 PERFORMANCE ORDER

Installation is made in an order, the return to an order of dismantle of components. Track correctness of combination of the landing labels put in the course of dismantle, do not forget to make centering of a contact drum (the Onboard electric equipment see the Head). The demanded effort of a tightening of a nut of fastening of a steering wheel makes 45 Nanometers.

 In order to avoid damage of a cable drum track correctness of hit of its directing finger in a reception aperture in the bottom part of a steering wheel. Sockets of electroconducting of the module of a pillow of safety, a horn and темпостата pass in a window in the bottom part of a wheel!


On the main page