Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Design and principle of functioning of elements of the hydrostrengthened steering drive - the general information
      Adjustable safety steering column - the general information
      Removal and steering wheel installation
      Removal, check of a condition and installation карданного the hinge of a steering column
      Removal, service and installation of a steering column
      Removal, service and installation of the steering mechanism
      Removal, installation and check of a condition of elements of hydraulic path ГУР
      Removal, service and installation of the steering pump
      Removal and installation of the tank of liquid ГУР
      Check and replacement of liquid ГУР, removal of air from a hydraulic path
   + Wheel assemblages, suspension bracket geometry
+ Body
+ Onboard electric equipment





Removal and installation of the tank of liquid ГУР

The scheme of connection of tube D and a soaking up hose (model 2.0 and 2.5)

1 — the Soaking up hose
2 — Tube D

3 — the Returnable hose


The scheme of connection of returnable and soaking up hoses (model 3.0)

1 — the Soaking up hose

2 — the Returnable hose


 PERFORMANCE ORDER

1. Empty the tank of system of hydrostrengthening of a wheel.
2. On models 2.0 and 2.5 l disconnect tube D from a returnable hose, and a soaking up hose from the steering pump.

 Try not to admit hits of a hydraulic liquid on приводной a belt, in order to avoid hit in dirt system at once закупорьте, or wrap up pure rags the open ends of lines!

3. On l models 3.0 disconnect from the tank soaking up and returnable hoses.

 Try not to admit hits of a hydraulic liquid on приводной a belt, in order to avoid hit in dirt system at once закупорьте, or wrap up pure rags the open ends of lines!

4. Having pulled upwards, liberate the tank from a basic arm.
5. Check up the removed tank on presence of cracks, cuts and other mechanical damages. In case of need make replacement.
6. Installation is made in an order, the return to an order of dismantle of components.
7. In summary fill system of hydrostrengthening of a wheel with a fresh hydraulic liquid (the Section Check and replacement of liquid ГУР, removal of air from a hydraulic path see).

On the main page