Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
- Onboard electric equipment
   Search of causes of failures of an electric equipment
   Safety locks and the relay - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting and alarm devices
   Adjustment of optical axes of head headlights
   Removal and installation of an instrument guard
   Removal and installation of components of an instrument guard
   Removal and installation of hours
   Removal and installation прикуривателя
   Alarm system “do not forget to switch off lighting devices” - the general information
   Removal and installation of a small horn of a horn
   Removal and installation drive a cable of a speedometer/gauge of speed
   Removal and installation of the lever of a screen wiper
   Removal and installation of the electromotor and draughts of a drive of a cleaner of a windscreen
   Removal and installation of the electromotor of a drive of a back screen wiper
   Removal and installation of components of system of washing of glasses and lenses of head block headlights
   Removal and radio tape recorder installation
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system - the general information
   Safety pillow - the general information, safety measures and system deactivation
   Removal and installation of components of a pillow of safety
   Diagnostics of systems of electronic control
+ Electric equipment schemes

Removal and installation of a small horn of a horn

Removal

 PERFORMANCE ORDER

1. A horn small horn (small horns) are located in the left corner передка the car. Depending on a model complete set can be provided one or two small horns which are established behind a bumper and-or to the left of it.
2. Disconnect a negative wire from the battery.
3. For the purpose of providing of access to a small horn which is to the left of a bumper, release a clamp () and remove локер arches of the left forward wheel.
4. Access to the small horn located behind a bumper opens through an aperture under installation of the left antifog headlight (Removal and installation of external lighting and alarm devices see).

5. Disconnect from a small horn (2) electroconducting, then give a fixing nut (1) and remove assemblage from the car.

Installation

Installation is made upside-down. Where it is required, do not forget to establish into place an antifog headlight (Removal and installation of external lighting and alarm devices see).


On the main page