Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
- Onboard electric equipment
   Search of causes of failures of an electric equipment
   Safety locks and the relay - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of external lighting and alarm devices
   Adjustment of optical axes of head headlights
   Removal and installation of an instrument guard
   Removal and installation of components of an instrument guard
   Removal and installation of hours
   Removal and installation прикуривателя
   Alarm system “do not forget to switch off lighting devices” - the general information
   Removal and installation of a small horn of a horn
   Removal and installation drive a cable of a speedometer/gauge of speed
   Removal and installation of the lever of a screen wiper
   Removal and installation of the electromotor and draughts of a drive of a cleaner of a windscreen
   Removal and installation of the electromotor of a drive of a back screen wiper
   Removal and installation of components of system of washing of glasses and lenses of head block headlights
   Removal and radio tape recorder installation
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   Anticreeping system - the general information
   Safety pillow - the general information, safety measures and system deactivation
   Removal and installation of components of a pillow of safety
   Diagnostics of systems of electronic control
+ Electric equipment schemes





Removal and installation of the lever of a screen wiper

Removal

 PERFORMANCE ORDER

1. Include a screen wiper and at once switch off it, having made sure of return of the lever to parking position.
2. Paste on glass adhesive tape pieces, having marked a brush starting position.

3. Remove a protective cap and ослабьте шпиндельную a lever nut. Pay attention that at removal of the lever of a cleaner of back glass before to give a nut, it is necessary to disconnect a socket of a hose of giving of a washing liquid from a spindle. Take away a brush from glass and remove the lever of a screen wiper from a spindle. In case of need hook the lever a screw-driver with a flat sting.

Installation

 PERFORMANCE ORDER

1. Make sure of cleanliness and dryness шлицов a spindle, then plant on them the lever, having tracked that the brush took places on glass according to the labels put in the course of dismantle.
2. Screw шпиндельную a nut and strongly tighten it. Do not forget to establish a protective cap.


On the main page