Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   - 4.1. Engine OHV (with a camshaft in the block of cylinders)
      4.1.1. A technical characteristics
      4.1.2. Compression check
      4.1.3. The repair operations which are not demanding removal of the engine
      + 4.1.4. The repair operations demanding removal of the engine
      4.1.5. Adjustment of backlashes of valves
      + 4.1.6. A head of the block of cylinders
      4.1.7. Removal and installation of the oil pallet
      - 4.1.8. The oil pump Removal and installation Repair of the oil pump
      + 4.1.9. Mechanism asterisks timing
      + 4.1.10. Pistons and rods
      4.1.11. Removal and flywheel installation
      4.1.12. Removal and installation of support of the power unit
      4.1.13. Removal and installation of a camshaft and pushers
      4.1.14. Removal and installation of a back sealing ring of a cranked shaft
      4.1.15. Removal and installation of a cranked shaft and radical bearings
      + 4.1.16. Check of elements of the engine
      4.1.17. System of greasing of the engine
      4.1.18. Removal and engine installation
      4.1.19. Start of the engine after major repairs
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes Repair of the oil pump
1. Remove the oil pump.
2. Unscrew two bolts and uncover the oil pump with маслоприемной a pipe. Remove a cover lining.
3. Take conducting (drawing at the left) and conducted gear wheels (drawing on the right) the oil pump.
4. Unscrew the big carving stopper located sideways of the oil pump, and take a sealing ring, a spring and a safety valve ball.
5. Clear all details of the oil pump in kerosene and dry up them.
6. Check up a condition of details of the oil pump on presence of deterioration or damages and in the presence of them replace the oil pump.
7. Using an edge probeа, measure a backlash between conducted and leading gear wheels of the oil pump. Using a metal ruler and probe, check up an axial backlash between the case of the oil pump and gear wheels.
8. If all details of the oil pump in a good condition, collect a safety valve of pressure and establish gear wheels of the oil pump. Fill the pump with oil, establish a cover of the pump with a new lining and fix its bolts, having tightened their demanded moment.

On the main page