Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   - 4.2. Engines OHC
      4.2.1. A technical characteristics
      4.2.2. Compression check
      + 4.2.3. The repair operations demanding removal of the engine
      4.2.4. Removal and installation of auxiliary elements of the engine
      4.2.5. Removal and installation of the valve of adjustment of pressure of oil
      + 4.2.6. A gear belt
      + 4.2.7. A head of the block of cylinders
      4.2.8. Removal and camshaft installation
      4.2.9. Removal and installation of the oil pallet
      + 4.2.10. The oil pump
      4.2.11. Removal and installation of pistons and rods
      4.2.12. Removal and flywheel installation
      4.2.13. Removal and installation of a forward sealing ring of a cranked shaft
      4.2.14. Removal and installation of support of the power unit
      4.2.15. Replacement of a back sealing ring of a cranked shaft
      + 4.2.16. A cranked shaft and radical bearings
      4.2.17. Check of details of the engine
      4.2.18. System of greasing and ventilation system картера
      4.2.19. Removal and engine installation
      4.2.20. Start of the engine after major repairs
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

4.2.5. Removal and installation of the valve of adjustment of pressure of oil Removal

PERFORMANCE ORDER
1. Behind a pulley of a cranked shaft unscrew the valve of adjustment of pressure of oil and take a spring and плунжер.
2. If the spring is deformed or elasticity of a spring has decreased, replace it.
3. In the presence of deterioration on плунжере replace it.

Installation

PERFORMANCE ORDER
Clear an aperture under плунжер and collect the valve of adjustment of pressure of oil with new consolidation under a stopper.


On the main page