Opel Kadett E
1984-1991 of release
Repair and car operation
Opel Kadett E
+
1. The maintenance instruction
+
2. Weekly checks and service in a way
+
3. Maintenance service
-
4. The engine
+
4.1. Engine OHV (with a camshaft in the block of cylinders)
+
4.2. Engines OHC
-
4.3. Engine DOHC with 16 valves
4.3.1. A technical characteristics
4.3.2. Compression check
+
4.3.3. The operations demanding removal of the engine
4.3.4. Removal of auxiliary components of the engine
4.3.5. Removal and installation of the valve of adjustment of pressure of oil
+
4.3.6. A gear belt
4.3.7. Removal and installation of the mechanism of a tension of a gear belt and rollers
4.3.8. Removal, check and installation of camshafts
+
4.3.9. A head of the block of cylinders
4.3.10. Removal and installation of the oil pallet and
маслоотражательной
plates
+
4.3.11. The oil pump
4.3.12. Removal and installation of the valve of the thermostat of an oil radiator
+
4.3.13. Pistons and rods
4.3.14. Removal and flywheel installation
-
4.3.15. Replacement of sealing rings
4.3.15.1. A forward sealing ring of a camshaft
4.3.15.2. A forward sealing ring of a cranked shaft
4.3.15.3. A back sealing ring of a cranked shaft
4.3.16. Removal, check and installation of bearings of a cranked shaft
4.3.17. Check of components of the engine
4.3.18. Removal and engine installation
4.3.19. Start of the engine after major repairs
+
4.4. Diesel engines 16D and 16DА
+
4.5. Diesel engines of 1,7 l
+
5. System of cooling, heating and ventilation
+
6. Fuel and exhaust systems
+
7. Start and gymnastics system
+
8. Ignition system
+
9. Coupling
+
10. Transmissions and power shafts
+
11. Brake system
+
12. A suspension bracket and a steering
+
13. A body
+
14. Electric schemes
4.3.15.3. A back sealing ring of a cranked shaft
PERFORMANCE ORDER
1.
Remove a flywheel.
2.
Replace a back sealing ring of a cranked shaft, look the corresponding description in
subsection 4.1.14
.
On the main page