Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
- Coupling
Specifications
- Flywheel and coupling
Flywheel and coupling - the general information and check of a condition of components
Removal, check of a condition and installation of components of assemblage of coupling
Removal, check of a condition and installation выжимного the bearing and the lever of deenergizing of coupling
Removal, check of a condition and installation of the executive cylinder of coupling
Removal, service and installation of components of the main cylinder of coupling
Check of a condition and replacement of connecting lines of a hydraulic path of a drive of coupling
Check of level and replacement of a hydraulic liquid of a drive of deenergizing of coupling
Removal of air from a hydraulic path of a drive of deenergizing of coupling
Removal, service, installation and adjustment of a pedal of coupling
Removal, installation and check of serviceability of a condition of the gauge-switch of disconnection of a chain of a starter
+ Приводные and карданный shaft, back differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Check of a condition and replacement of connecting lines of a hydraulic path of a drive of coupling
CHECK
|
|
|
Attentively examine tubes and hoses of hydraulic lines on presence of cracks, breaks and other damages, check up places of a joint of lines on presence of signs of development of leaks. Defective units replace. |
|
REPLACEMENT
|
|
|
1. Remove the case of an air cleaner with an air inlet sleeve (see the Head of the Power supply system and release).
2. Merge a hydraulic liquid of coupling (the Section Check of level and replacement of a hydraulic liquid of a drive of deenergizing of coupling see).
3. Disconnect a metal tube from the main cylinder and from a hose of a hydraulic line.
|
|
4. Take a clamp and liberate a hydraulic hose of coupling of their basic arm.
A — the Collar
B — a coupling Hose |
5. Disconnect a hose from the executive cylinder.
6. Installation is made in an order, the return to an order of removal of components. Track, that all fixture has been tightened with demanded effort.
|
|
|
On the main page
|