Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      + 6.1.11. Carburettors
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





6.1.10. Removal, installation and adjustment of a cable of management air заслонкой

Removal

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
2. Take a pin of fastening of a cable of management air заслонкой to the handle and disconnect a cable from the handle. Unscrew and remove the handle of management air заслонкой.
3. Unscrew a lock ring or a nut, which крепят the handle of management air заслонкой to the panel of devices. Move the handle in the panel and disconnect an electric socket of a control lamp.
4. Remove the air filter.
5. Disconnect a cover and a cable of management air заслонкой from the carburettor. On some models the cable of management air заслонкой fastens a bolt (it is specified by an arrow) which is preliminary necessary for weakening.
6. Take a sealing ring of a cable from a partition of a motor compartment and take a cable.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. If necessary adjust a cable of management air заслонкой.

Adjustment

PERFORMANCE ORDER
Cable adjustment can be made, moving or fastening of a cover of a cable, or a cable. If the handle of management is moved by a cable against the stop, there should be an insignificant sagging of a cable from outside the carburettor. Extend the management handle against the stop and check up that air заслонка completely opens.

On the main page