Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      + 6.1.11. Carburettors
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





6.1.6. Removal and installation of the gauge of level of fuel

Removal

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator and a cover fuel filler mouths.
2. Through топливозаливную a mouth pump out fuel from a fuel tank.
3. Lift a back part of the car and fix on supports.
4. Disconnect an electric socket from the gauge of level of fuel.
5. Using a marker or a paint, put combination labels on the gauge and a fuel tank that the gauge could be established in initial position. Insert a steel core into grooves of a cover of the gauge and turn a cover counter-clockwise. If the gauge cover is fixed by bolts, unscrew them.
6. Being careful, take the gauge of level of fuel from a fuel tank, thus do not bend the float lever.
7. Remove a sealing ring.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal, but thus it is necessary to use a new sealing ring.

On the main page