Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      + 6.1.11. Carburettors
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

6.1.4. System of adjustment of temperature of air arriving in the engine
THE GENERAL DATA

L MODELS 1,2

The temperature of air arriving in the engine copes manually заслонкой, located in the case of the air filter. Заслонка depending on seasonal temperature can be established in one of three positions:

 – Summer position – above 10 ° With;
 – Intermediate position – 10 ° With–-5 ° With;
 – Winter position – less-5 ° With.

Engine work will be more effective at installation заслонки in summer position and the least effective in winter position заслонки. If the engine works normally and keeps the dynamic characteristics, summer position заслонки the engine can be kept to temperature 0 ° S.Esli starts to work unstably, move заслонку to following position.

Positions заслонки are specified on a cover. In winter position заслонки in the engine air which has been warmed up by a final collector arrives only. In summer position заслонки in the engine fresh air from an air inlet arrives only. In intermediate position заслонки in the engine arrives both fresh air, and air which has been warmed up by a final collector.

MODELS 1,3, 1,4 and 1,6 L

The block of adjustment of temperature of air arriving in the engine maintains optimum temperature of air for combustion of fuel with a minimum quantity of emissions of harmful substances.

The optimum temperature of air submitted to the engine is reached by mixing of the fresh cold air arriving from an air inlet on the forward party of the car, with air warmed-up with an inlet collector. The proportion of the warmed-up and cold air is regulated by position of a folding shutter in the block in front of the air filter. The adjustment block copes either a vacuum diaphragm or a wax capsule. The vacuum diaphragm copes the gauge of temperature located in the case of the air filter.


On the main page