Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative lattice of a radiator
   Removal and installation of the panel of protection картера
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal and installation локеров protection of arches of forward wheels
   Removal and installation of lateral overlays кузовных panels
   Removal and installation forward обтекателя
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the panel of devices
   Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)
   Removal and installation of elements of internal furnish
   Seat belts - the general information, condition check, removal and installation, an order of recycling not worked emergency натяжителей
   Removal, service and installation of seats
   Removal, installation and cowl adjustment
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components замковых assemblages
   Removal, installation and adjustment of door glasses and components Glass lifts
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of giving of a washing liquid
   Control кузовные the sizes
+ Onboard electric equipment

Seat belts - the general information, condition check, removal and installation, an order of recycling not worked emergency натяжителей

Design of seat belts of forward seats

1 — Regulated анкерный knot of humeral section of a seat belt
2 — the Decorative overlay анкерного knot
3 — Directing скоба
4 — Ankernyj a collar with a buckle
5 — the Seat belt

Efforts of a tightening of carving connections, Nanometer

Т1: 7.5
Т2: 30
Т3: 53


Design of seat belts of a back seat of models the Sedan

1 — Humeral section of the right seat belt
2 — Humeral section of the central seat belt
3 — Humeral section of the left seat belt
4 — Ankernaja section of the right seat belt
5 — Ankernaja section of the central seat belt
6 — Ankernaja section of the left seat belt

7 — the Casing of the returnable device

Efforts of a tightening of carving connections, Nanometer

Т: 30


Design of seat belts of a back seat of models Legacy of Universal/Outback

1 — Ankernyj a collar of humeral section of the right seat belt
2 — Humeral section of the central seat belt
3 — Ankernyj a collar of humeral section of the left seat belt
4 — Ankernaja section of the central and right seat belts
5 — Ankernaja section of the central and left seat belts

Efforts of a tightening of carving connections, Nanometer

Т1: 30
Е2: 53


Safety measures

 Worked emergency натяжители seat belts to a reuse are not subject and should be replaced by the new!


Before to start removal of seat belts switch off ignition, disconnect a negative wire from the battery and wait not less than 20 seconds during which the condenser of the independent power supply emergency натяжителей should be discharged.

Try not to subject assemblage emergency натяжителей seat belts to shock loadings, - address with them extremely carefully. Do not suppose heating натяжителей and their contact to an open flame. At hit on a surface натяжителя oils or greasings immediately collect traces of pollution by pure dry rags.

Do not suppose giving on assemblages emergency натяжителей an electric food, do not use for resistance check натяжителей testers for diagnostics of electric chains.

Do not make attempts of dismantling emergency натяжителей, - in case of revealing of signs of mechanical damages replace defective knot in gathering.

 At all do not use as replaceable components SRS from other cars!


At removal of a seat belt with worked emergency натяжителем dress goggles and gloves, having finished replacement procedure carefully wash up hands.

 Before recycling not worked натяжителя it is necessary to make necessarily its discharge (see more low)!


Check of a condition of seat belts after emergency collision

 PERFORMANCE ORDER

1. After car hit in failure attentively examine panels of furnish of salon around installation of returnable devices of seat belts, - in case of revealing of cracks, and also at plastic decolouration replace assemblage of a seat belt with worked натяжителем.
2. Estimate a condition of electroconducting and contact sockets emergency натяжителей, in case of revealing of defects replace the damaged components.


Seat belts of forward seats

Removal

 PERFORMANCE ORDER

1. Combine a back of a forward seat forward against the stop.
2. Shift seat assemblage forward against the stop.
3. Switch off ignition, disconnect a negative wire from the battery and wait not less than 20 seconds before to start seat belt removal.
4. Remove the bottom panel of furnish of the central rack (see Has undressed Removal and installation of elements of internal furnish).

5. Remove an arm.

6. Having wrung out a clamp uvula, also separate from a rack directing скобу seat belt tapes.

7. Remove a decorative cover, turn out a fixing bolt and remove from the central rack top анкерный knot of humeral section of a seat belt.

8. Unbend the carpet panel of a covering of a floor, disunite a yellow contact socket of electroconducting emergency натяжителя, then turn out анкерные bolts of fastening of assemblage of the returnable device and remove seat belt assemblage.

9. Disunite a contact socket of the gauge-switch of a control lamp «Fasten belts», turn out a fixing bolt and remove equipped with a buckle анкерный a collar from the interior of a seat frame.


Check of a condition of components

 PERFORMANCE ORDER

1. Attentively study an assemblage condition натяжителя, - in case of revealing of signs of mechanical damages make replacement.
2. Check up a belt tape on presence of signs of a wipe, разрыхления a fabric basis and other defects, in case of need replace a belt.
3. Estimate a condition анкерного a collar, check up serviceability of functioning of a buckle and reliability of fixing in it замковой скобы a belt, in case of need replace a collar in gathering.


Installation

 PERFORMANCE ORDER

Installation is made in an order, the return to an order of dismantle of components, - track, that all fixture has been tightened with demanded effort (Specifications and accompanying illustrations to subsection "Design" see).


Seat belts of a back seat

Removal

Models the Sedan

Humeral sections of lateral belts

 PERFORMANCE ORDER

1. Remove the panel of furnish of a back shelf.
2. Remove the top cover of an overlay of a threshold of a back door (see Has undressed Removal and installation of elements of internal furnish).

3. Turn out fixing bolts and remove a belt.


Humeral section of the central belt

 PERFORMANCE ORDER

Execute procedures of paragraphs with 2 on 5 Has undressed Removal and installation of elements of internal furnish, then turn out a fixing bolt and remove a seat belt.


Ankernye sections of seat belts

 PERFORMANCE ORDER

1. Remove a pillow of a back seat (see Has undressed Removal, service and installation of seats).

2. Turn out fixing bolts and remove анкерные sections of seat belts.

Models Legacy of Universal/Outback

Humeral sections of lateral belts

 PERFORMANCE ORDER

1. Remove the basic and top sections of the back lateral panel of furnish of salon (see Has undressed Removal and installation of elements of internal furnish).

2. Give fixing bolts/nuts and remove a belt.

Humeral section of the central belt

 PERFORMANCE ORDER

1. Remove a lantern of illumination of a luggage space (the Onboard electric equipment see the Head).
2. Execute procedures of paragraphs 7 both 8 Has undressed Removal and installation of elements of internal furnish, then release fixing clamps and unbend back edge of a ceiling upholstery.

3. Disconnect electroconducting, turn out fixing bolts and remove a seat belt.

Ankernye sections of seat belts

 PERFORMANCE ORDER

1. Lift a pillow of a back seat (see Has undressed Removal, service and installation of seats).

2. Turn out fixing bolts and remove анкерные sections of seat belts.


Check of a condition of components

 PERFORMANCE ORDER

1. Check up tapes of belts on presence of signs of a wipe, разрыхления a fabric basis and other defects, in case of need make replacement.
2. Estimate a condition анкерных sections, check up serviceability of functioning of a buckle and reliability of fixing in it замковой скобы a belt, in case of need replace a collar in gathering.


Installation

 PERFORMANCE ORDER

 The preventions listed above, in "Safety measure" subsection see!

Installation is made in an order, the return to an order of dismantle of components, - track, that all fixture has been tightened with demanded effort (Specifications and accompanying illustrations to subsection "Design" see).


Order of recycling not worked emergency натяжителей seat belts

 The preventions listed, in "Safety measure" subsection in the beginning of the present Section see!


Preparation for a discharge

 PERFORMANCE ORDER

 Before recycling not worked натяжителя it is necessary to make necessarily its discharge (see more low)!

1. The discharge emergency натяжителя should be made on a flat equal surface, free from extraneous subjects.
2. As at a discharge натяжителя occurs взрывообразно and it is accompanied by very loud clap, track, that nobody was in radius of 5 metres from натяжителя.
3. Operation натяжителя is accompanied дымообразованием in view of what the discharge should be made in well ventilated premise.
4. Before to start procedure performance put on goggles and gloves, having finished, do not forget to wash up a hand carefully.
5. After operation натяжитель there is hot during more enough long time, - do not touch assemblage at least 40 minutes.
6. Do not suppose hit on worked натяжитель a moisture, - before recycling wrap assemblage in a polyethylene package.
Discharge


Discharge without removal натяжителя from the car

 PERFORMANCE ORDER

1. Prepare a special set for a discharge натяжителя.

2. Combine a back of a forward seat and shift seat assemblage against the stop forward.
3. Switch off ignition, disconnect a negative wire from the battery and wait not less than 20 seconds.

4. Remove the bottom panel of furnish of the central rack (see Has undressed Removal and installation of elements of internal furnish) and disunite a yellow socket of electroconducting emergency натяжителя a seat belt.

5. By means of a clip of type entering into the complete set "crocodile" close the plug of a plug socket of a connecting cable from a set for a discharge натяжителя, - contact should remain closed till the moment actually the discharge beginnings натяжителя!
6. Connect a socket 2D a set of an adapter entering into the complete set to a yellow socket of electroconducting натяжителя, the second end of a nozzle connect to a reciprocal socket of a connecting cable.
7. Completely unwind a connecting cable, make sure that nobody is in the car, then densely close all doors (including a door of a back/cover of a luggage space), windows and hatches.

8. Establish the storage battery on distance not less than 5 m from the car, make sure that nobody is to a 5-metre dangerous zone, disconnect a clip of type "crocodile" from the plug of a plug socket and connect it to a negative pole of the battery, connect the second a connecting cable connect to a positive pole of the battery, - prepare for sound blow.

 Do not touch to worked натяжителя during a minimum of 40 minutes!

9. Remove a seat belt and turn worked натяжитель in a polyethylene package.



Discharge removed from the car натяжителя

 PERFORMANCE ORDER

1. Cut off a seat belt tape as it is possible more close to assemblage натяжителя.

2. Prepare a special set and connect a connecting cable to натяжителю.

3. With the help трехжильного a plait with section of each vein not less than 1.25 мм2 it is strong примотайте натяжитель to a disk of wheel assemblage.

4. Lay from above on a wheel with adhered to it натяжителем four automobile tyre covers (натяжитель it should appear in the formed chamber), from above put one more wheel assemblage (a disk with the put on tyre cover) and strongly wind turned out design with a strong cord.

5. Further operate also, as well as at a discharge not removed from the car натяжителя (see above).


On the main page