Subaru Legacy/Outback

1999-2003 of release

Repair and car operation

Removal and installation of the panel of devices

The standard complete set of all models of cars considered in the present Management includes system of additional safety (SRS). Before to start performance of any works near to blocks of pillows of safety, a steering column or the instrument panel, disconnect SRS in order to avoid reception of traumas at its casual operation (the Onboard electric equipment see the Head)! Electroconducting of chain SRS is easy for distinguishing on yellow colour of isolation.

The description of procedures of removal/installation and service of a combination of devices see in the Head the Onboard electric equipment.

Details of installation of the panel of devices and elements of the central console

1 — the Panel of devices
2 — Deflektor of an air line blowing lateral glass
3 — the Directing hook
4 — Deflektor of an air line blowing lateral glass
5 — Deflektor of a lateral air line of ventilation of salon
6 — the Panel of a ware box
7 — the Cover of a ware box
8 — the Lateral panel of furnish of the central console
9 — the Lateral panel of furnish of the central console
10 — the Forward cover of the central console (model with АТ)
11 — the Forward cover of the central console (model with РКПП)
12 — Assemblage of back coasters
13 — the Console box
14 — the Back ashtray
15 — the Cover of a console box

16 — the Cover of console assemblage
17 — the Tray
18 — the Ashtray
19 — the Bottom cover
20 — the Central (console) section of furnish of the panel of devices
21 — Assemblage of a forward coaster
22 — the Panel of switches
23 — the Panel of facing of a combination of devices
24 — Deflektor of a lateral air line of ventilation of salon
25 — Deflektory of the central air line of ventilation of salon

Efforts of a tightening of carving connections, Nanometer

Т: 7 ± 1

REMOVAL

PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

2. Remove the left bottom section of furnish of the panel of devices.

3. Turn out the fixing screw and remove the bottom cover of a casing of a steering column (the Suspension bracket and a steering see the Head).
4. Remove the main ware box (see Has undressed Removal installation of the main ware box).

5. Remove the bottom lateral panels of furnish of the central console.

6. Remove the module of a passenger face-to-face pillow of safety (the Onboard electric equipment see the Head).

7. Remove the top panels of furnish of both forward racks.

8. Remove the bottom panel of furnish of a forward rack (a threshold overlay) from the passenger party of salon.

9. On hand-operated models functioning of systems of heating/air conditioning translate the handle of a choice of a temperature mode in extreme right position (corresponding to the maximum intensity of heating of air), then disconnect a cable of a drive mixing заслонки from the bottom part of assemblage of a heater.

At installation try not to suppose change of position of the handle and приводной draught.

10. Turn out bolts of fastening of the panel of devices.

11. Preliminary having marked, disunite contact sockets of electroconducting and cautiously take the panel of devices from car salon.

At рассоединении sockets at all do not pull for electroconducting plaits!

12. Lay the removed assemblage vertically on pair wooden blocks, - try not to scratch a covering.

INSTALLATION

PERFORMANCE ORDER

1. Installation is made in an order, the return to an order of dismantle of components.

2. At landing of the panel of devices to the regular place track correctness of hit of three directing hooks in plugs of reciprocal apertures through passage in кузовной panels. Try not to admit a jamming of plaits of electroconducting, track reliability of fixing of contact sockets. The demanded size of effort of a tightening of fixing bolts makes 7 ± 1 Nanometer.

On the main page